Data Sheet

DATASHEET - AK-PKZ0
Rotary handle, lockable
Part no. AK-PKZ0
Catalog No. 030851
Alternate Catalog
No.
XTPAXLRH
EL-Nummer
(Norway)
4355090
Delivery program
Product range   Accessories
Accessories   Rotary handle, lockable
   for locking motor-protective circuit-breakers PKZM0, PKZM4 and PKE as a main
switch in compliance with EN 60204
Can be padlocked in the “0” position with a padlock
Hasp thickness: 3 – 6.35 mm
For use with   PKZM0
PKZM4
PKZM0-T
PKM0
PKE
PKZ-SOL
P-SOL
Notes Cannot be used in combination with VHI20-PKZ0.
Usable add-on front plates:
ZFS…-T0 or ZFS…-P3
17 x 48 mm or 27 x 88 mm and ZFS60-NZM7
17 x 64 mm
For use on surface-mounted and installation housings.
Design verification as per IEC/EN 61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 0
Heat dissipation per pole, current-dependent P
vid
W 0
Equipment heat dissipation, current-dependent P
vid
W 0
Static heat dissipation, non-current-dependent P
vs
W 0
Heat dissipation capacity P
diss
W 0
Operating ambient temperature min.  °C -25
Operating ambient temperature max.  °C 55
IEC/EN 61439 design verification   
10.2 Strength of materials and parts   
10.2.2 Corrosion resistance   Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures   Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat   Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   Meets the product standard's requirements.
10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions   Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES   Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances   Meets the product standard's requirements.
10.5 Protection against electric shock   Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components   Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections   Is the panel builder's responsibility.
10.8 Connections for external conductors   Is the panel builder's responsibility.
10.9 Insulation properties   
10.9.2 Power-frequency electric strength   Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage   Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material   Is the panel builder's responsibility.
10.10 Temperature rise   Not applicable.
06/16/2021 Eaton 030851 ED2021 V80.0 EN 1 / 3