Data Sheet

Technical safety parameters:
Notes   B10
d
values as per EN ISO 13849-1, table C1
Rating data for approved types
Contacts   
Rated operational voltage U
e
V AC 600
Rated uninterrupted current max.   
Main conducting paths   
General use  A 25
Auxiliary contacts   
General Use I
U
A 10
Pilot Duty   A 600
Switching capacity   
Maximum motor rating   
Single-phase   
120 V AC  HP 1.5
200 V AC  HP 3
240 V AC  HP 3
Three-phase   
200 V AC  HP 3
240 V AC  HP 3
480 V AC  HP 7.5
600 V AC  HP 10
Short Circuit Current Rating  SCCR 
Basic Rating  kA 5
max. Fuse  A 40
High fault rating  kA 10
max. Fuse  A 40, Class J
Terminal capacity   
Solid or flexible conductor with ferrule  AWG 14 - 10
Terminal screw   M4
Tightening torque  lb-in 17.7
Design verification as per IEC/EN 61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 32
Heat dissipation per pole, current-dependent P
vid
W 1.1
Equipment heat dissipation, current-dependent P
vid
W 0
Static heat dissipation, non-current-dependent P
vs
W 0
Heat dissipation capacity P
diss
W 0
Operating ambient temperature min.  °C -25
Operating ambient temperature max.  °C 50
IEC/EN 61439 design verification   
10.2 Strength of materials and parts   
10.2.2 Corrosion resistance   Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures   Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat   Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   UV resistance only in connection with protective shield.
10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions   Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES   Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances   Meets the product standard's requirements.
10.5 Protection against electric shock   Does not apply, since the entire switchgear needs to be evaluated.
01/09/2020 Eaton 036961 ED2019 V63.0 EN 4 / 6