Data Sheet
2 60 V A 2.5
3 110 V A 1.5
3 220 V A 0.5
Control circuit reliability Failure rate λ
<10
-8
, < one failure at 100 million operations
(at U
e
= 24 V DC, U
min
= 17 V, I
min
= 5.4 mA)
Short-circuit rating without welding
Maximum overcurrent protective device
220 V 230 V 240 V PKZM0 4
380 V 400 V 415 V PKZM0 4
Short-circuit protection maximum fuse
500 V A gG/gL 6
500 V A fast 10
Current heat loss at I
th
AC operated W 1.1
Magnet systems
Voltage tolerance
AC operated
Single-voltage coil 50 Hz and dual-voltage coil 50 Hz, 60 Hz Pick-up x U
c
0.8 - 1.1
Dual-frequency coil 50/60 Hz Pick-up x U
c
0.85 - 1.1
Power consumption
AC operation
Single-voltage coil 50 Hz and dual-voltage coil 50 Hz, 60 Hz Pick-up VA 25
Single-voltage coil 50 Hz and dual-voltage coil 50 Hz, 60 Hz Sealing VA 4.6
Single-voltage coil 50 Hz and dual-voltage coil 50 Hz, 60 Hz Sealing W 1.3
duty factor % DF 100
Changeover time at 100 % U
S
(recommended value)
AC operated closing delay ms 14 - 21
AC operated N/O contact opening delay ms 8 - 18
AC operated With auxiliary contact module Max. closing delay ms 45
Rating data for approved types
Auxiliary contacts
Pilot Duty
AC operated A600
DC operated P300
General Use
AC V 600
AC A 10
DC V 250
DC A 0.5
Design verification as per IEC/EN 61439
Technical data for design verification
Rated operational current for specified heat dissipation I
n
A 6
Heat dissipation per pole, current-dependent P
vid
W 0.4
Equipment heat dissipation, current-dependent P
vid
W 0
Static heat dissipation, non-current-dependent P
vs
W 1.8
Heat dissipation capacity P
diss
W 0
Operating ambient temperature min. °C -25
Operating ambient temperature max. °C 50
IEC/EN 61439 design verification
10.2 Strength of materials and parts
10.2.2 Corrosion resistance Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
Meets the product standard's requirements.
06/18/2021 Eaton 051777 ED2021 V80.0 EN 3 / 7