Data Sheet

ManualsBrandsEATON ManualsContactorsDILEM-01(230V50HZ,240V60HZ)

DATASHEET - DILEM-01(230V50HZ,240V60HZ)

Contactor, 230 V 50 Hz, 240 V 60 Hz, 3 pole, 380 V 400 V, 4 kW, Contacts N/C

= Normally closed= 1 NC, Screw terminals, AC operation

Part no. DILEM-01(230V50HZ,240V60HZ)

Catalog No. 051795

Alternate Catalog

No.

XTMC9A01F

EL-Nummer

(Norway)

4130382

Delivery program

Product range   Contactors

Application   Mini Contactors for Motors and Resistive Loads

Subrange   DILEM contactors

Utilization category   AC-1: Non-inductive or slightly inductive loads, resistance furnaces

AC-3/AC-3e: Normal AC induction motors: Starting, switching oﬀ while running

AC-4: Normal AC induction motors: starting, plugging, reversing, inching

  

Notes   Also suitable for motors with eﬃciency class IE3.

Also tested according to AC-3e.

Connection technique   Screw terminals

Description   With auxiliary contact

Number of poles   3 pole

Rated operational current

  

AC-3   

380 V 400 V I

A 9

AC-1   

Conventional free air thermal current, 3 pole, 50 - 60 Hz   

Open   

at 40 °C I

A 22

Max. rating for three-phase motors, 50 - 60 Hz

  

AC-3   

220 V 230 V P kW 2.2

380 V 400 V P kW 4

660 V 690 V P kW 4

AC-4   

220 V 230 V P kW 1.5

380 V 400 V P kW 3

660 V 690 V P kW 3

Contacts

  

N/C = Normally closed   1 NC

Contact sequence  

For use with   …DILE

Actuating voltage   230 V 50 Hz, 240 V 60 Hz

Voltage AC/DC   AC operation

Technical data

General

Standards   IEC/EN 60947, VDE 0660, CSA, UL

Lifespan, mechanical; Coil 50/60 Hz Operations

x 10

Lifespan, mechanical Operations

x 10

Maximum operating frequency   

06/18/2021 Eaton 051795 ED2021 V80.0 EN 1 / 11

Summary of content (11 pages)

PAGE 1
DATASHEET - DILEM-01(230V50HZ,240V60HZ) Contactor, 230 V 50 Hz, 240 V 60 Hz, 3 pole, 380 V 400 V, 4 kW, Contacts N/C = Normally closed= 1 NC, Screw terminals, AC operation Delivery program Part no. Catalog No. Alternate Catalog No.
PAGE 2
Mechanical electrical (Contactors without overload relay) Ops./h Operations/h 9000 Page 05/070 Climatic prooﬁng Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 Ambient temperature Open °C -25 - +50 Enclosed °C - 25 - 40 Storage °C Min. ambient temperature, storage °C - 40 Ambient temperature, storage max.
PAGE 3
Breaking capacity 220 V 230 V A 90 380 V 400 V A 90 500 V A 64 660 V 690 V A 42 Short-circuit protection maximum fuse AC Type ”2”, 500 V gL/gG A 10 Type ”1”, 500 V gL/gG A 20 at 40 °C Ith =Ie A 22 at 50 °C Ith =Ie A 20 at 55 °C Ith =Ie A 19 Ith A 16 AC-1 Rated operational current Conventional free air thermal current, 3 pole, 50 - 60 Hz Open enclosed Notes At maximum permissible ambient air temperature.
PAGE 4
DC 220 V 230 V P kW 1.5 240 V P kW 1.8 380 V 400 V P kW 3 415 V P kW 3.1 440 V P kW 3.3 500 V P kW 3 660 V 690 V P kW 3 12 V Ie A 20 24 V Ie A 20 60 V Ie A 20 110 V Ie A 20 220 V Ie A 20 Single-voltage coil 50 Hz and dual-voltage coil 50 Hz, 60 Hz Pick-up x Uc 0.8 - 1.1 Dual-frequency coil 50/60 Hz Pick-up x Uc Rated operational current open DC-1 Magnet systems Voltage tolerance AC operated Voltage tolerance Dual-frequency coil 50/60 Hz, max.
PAGE 5
between the auxiliary contacts V AC 300 Rated operational current AC-15 220 V 240 V Ie A 6 380 V 415 V Ie A 3 500 V Ie A 1.5 DC L/R ≦ 15 ms Contacts in series: A 1 24 V A 2.5 2 60 V A 2.5 3 100 V A 1.5 3 220 V A 0.5 Conv. thermal current Ith A 10 Control circuit reliability Failure rate λ <10 , < one failure at 100 million operations (at Ue = 24 V DC, Umin = 17 V, Imin = 5.4 mA) Operations x 10 6 0.2 Operations x 10 6 0.
PAGE 6
max. Fuse A 45 Design veriﬁcation as per IEC/EN 61439 Technical data for design veriﬁcation Rated operational current for speciﬁed heat dissipation In A 9 Heat dissipation per pole, current-dependent Pvid W 0.4 Equipment heat dissipation, current-dependent Pvid W 1.2 Static heat dissipation, non-current-dependent Pvs W 1.8 Heat dissipation capacity Pdiss W 0 Operating ambient temperature min. °C -25 Operating ambient temperature max. °C 50 IEC/EN 61439 design veriﬁcation 10.
PAGE 7
Type of electrical connection of main circuit Screw connection Number of normally closed contacts as main contact 0 Number of main contacts as normally open contact 3 Approvals Product Standards IEC/EN 60947-4-1; UL 508; CSA-C22.2 No. 14-05; CE marking UL File No. E29096 UL Category Control No. NLDX CSA File No. 012528 CSA Class No. 3211-04 North America Certiﬁcation UL listed, CSA certiﬁed Specially designed for North America No Characteristics 06/18/2021 Eaton 051795 ED2021 V80.
PAGE 8
1: Overload relay 2: Suppressor 3: Auxiliary contact modules Enclosure totally insulated Squirrel-cage motor Operating characteristics Starting:from rest Stopping:after attaining full running speed Electrical characteristics Make: up to 6 x rated motor current Break: up to 1 x rated motor current Utilization category 100 % AC-3 Typical applications Compressors Lifts Mixers Pumps Escalators Agitators Fans Conveyor belts Centrifuges Hinged ﬂaps Bucket-elevators Air conditioning system General drives in manuf
PAGE 9
Switching duty for non-motor loads, 3-pole, 4-pole Operating characteristics Non-inductive or slightly inductive loads Electrical characteristics Make: 1 x rated current Break: 1 x rated current Utilization category 100 % AC-1 Typical applications Electric heat 06/18/2021 Eaton 051795 ED2021 V80.
PAGE 10
Short-time loading, 3-pole Time interval between two loading cycles: 15 minutes Dimensions 06/18/2021 Eaton 051795 ED2021 V80.
PAGE 11
2DILE-… + MVDILE + …DILE 2DILE-…-G + MVDILE + …DILE 2DILE-… + MVDILE + …DILE 2DILE-…-G + MVDILE + …DILE 2DILE-… + MVDILE 2DILE-…-G + MVDILE 06/18/2021 Eaton Industries GmbH http://www.eaton.eu © 06/2021 by Eaton Industries GmbH Eaton 051795 ED2021 V80.