Data Sheet

3 100 V A 1.5
3 220 V A 0.5
Conv. thermal current I
th
A 10
Control circuit reliability Failure rate λ
<10
-8
, < one failure at 100 million operations
(at U
e
= 24 V DC, U
min
= 17 V, I
min
= 5.4 mA)
Component lifespan at U
e
= 240 V
AC-15 Operations
x 10
6
0.2
DC current
L/R = 50 ms: 2 contacts in series at I
e
= 0.5 A Operations
x 10
6
0.15
Notes Switch-on and switch-off conditions based on DC-13, time constant as specified
Short-circuit rating without welding
Maximum overcurrent protective device
Short-circuit protection only PKZM0-4
Short-circuit protection maximum fuse
500 V A gG/gL 6
500 V A fast 10
Current heat loss at a load of I
th
per contact W 1.1
Rating data for approved types
Switching capacity
Maximum motor rating
Three-phase
200 V
208 V
HP 2
230 V
240 V
HP 3
460 V
480 V
HP 5
575 V
600 V
HP 5
Single-phase
115 V
120 V
HP 0.5
230 V
240 V
HP 1.5
General use A 15
Short Circuit Current Rating SCCR
Basic Rating
SCCR kA 5
max. Fuse A 45
Design verification as per IEC/EN 61439
Technical data for design verification
Rated operational current for specified heat dissipation I
n
A 22
Heat dissipation per pole, current-dependent P
vid
W 2.39
Equipment heat dissipation, current-dependent P
vid
W 9.56
Static heat dissipation, non-current-dependent P
vs
W 1.8
Heat dissipation capacity P
diss
W 0
Operating ambient temperature min. °C -25
Operating ambient temperature max. °C 50
IEC/EN 61439 design verification
10.2 Strength of materials and parts
10.2.2 Corrosion resistance Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation Meets the product standard's requirements.
06/18/2021 Eaton 051804 ED2021 V80.0 EN 5 / 11