Data Sheet

DATASHEET - Q25LF-GE/WB
Indicator light, flush, yellow, +filament lamp, 24 V
Part no. Q25LF-GE/WB
Catalog No. 088798
Alternate Catalog
No.
Q25LF-GE-WB

Delivery program
Product range   RMQ16
Basic function   Indicator lights
Mounting hole diameter ⌀ mm 16
Single unit/Complete unit   Single unit
Design   Flush
Colour
  
Lens   yellow
Lens  
Degree of Protection   IP65
Connection to SmartWire-DT   no
Technical data
General
Standards   IEC/EN 60947
Degree of protection, IEC/EN 60529   IP65
Climatic proofing   Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature   
Open  °C -25 - +60
Enclosed  °C - 25 - 40
Mounting position   As required
Mechanical shock resistance  g > 40
according to IEC 60068-2-27
Shock duration 11 ms
Sinusoidal
Terminal capacities 
mm
2
0.5 - 1.0
Blade terminal   2.8 x 0.8 mm to DIN 46244
Fast-on connectors   2.8 x 0.8 mm to DIN 46247 and IEC 60760
Contacts
Rated impulse withstand voltage U
imp
V AC 800
Rated insulation voltage U
i
V 250
Overvoltage category/pollution degree   III/3
Rated operational voltage U
e
V AC 24
Use of insulated ferrule ISH 2,8   >24 V AC/DC recommended
>50 V AC or 120 V DC is mandatory, even on unused blade terminals
Design verification as per IEC/EN 61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 0
Heat dissipation per pole, current-dependent P
vid
W 0
Equipment heat dissipation, current-dependent P
vid
W 0
Static heat dissipation, non-current-dependent P
vs
W 1
Heat dissipation capacity P
diss
W 0
06/18/2021 Eaton 088798 ED2021 V80.0 EN 1 / 3