Data Sheet

Digital inputs 24 V DC
Number   12
Inputs can be used as analog inputs   4 (I7, I8, I11, I12)
Status Display   LCD-Display
Potential isolation   from the outputs: yes
to network easyNet, easyLink
Rated operational voltage U
e
V DC 24
Input voltage  V DC < 5 (I1 - I6, I9 - I10) < 8 (I7, I8, I11, I12) at signal "0"
> 15.0 (I1 - I6, I9, I10) > 8.0 (I7, I8, I11, I12) at signal "1"
Input current on 1 signal   
Input current at signal 1  mA 3.3 (I1 to I6)
2.2 (I7, I8)
3.3 (I9, I10)
2.2 (I11, I12)
Deceleration time  ms normally 0.02 (I1 - I4), normally 0.25 (I5 - I12) (from ''0'' to "1")
normally 0.02 (I1 - I4), normally 0.25 (I5 - I12) (from ''0'' to "1")
Cable length  m 100 (unshielded)
Incremental counter   
Number of counter inputs   1 (I1, I2, I3, I4)
Value range   32 Bit
Counter frequency  kHz ≦ 40
Pulse shape   Square
Counter inputs   I1, I2
Reference input   I3
Input for reference switch   I4
Counter inputs I1 and I2, I3 and I4   1
Signal offset   90°
Rapid counter inputs   
Number   2 (I1, I2) at 16 Bit or 1 (I1) at 32 Bit
Value range   16/32 Bit
Cable length  m ≦ 20 (screened)
Counter frequency  kHz ≦ 50
Pulse shape   Square
Analog inputs
Number   4 (I7, I8, I11, I12)
Potential isolation   from the outputs: yes
to interface/memory card: no
Input type   DC voltage
Signal range   0-10 V DC
Resolution   0.01 V analog
0.01 V digital
10 Bit (value 0 - 1023)
Input impedance  kΩ 11.2
Accuracy of actual value   
Within a single device  % ± 2, (I7, I8, I11, I12) ± 0.12 V
Conversion time, analog/digital  ms each CPU cycle
Input current  mA < 1
Cable length  m ≦ 30, screened
Analog outputs
Number   1
Output type   DC voltage
Max. output current  A 0.01
Load resistance   1 kΩ
Overload and short-circuit protection   Yes
Resolution   0.01 V DC analog
10 Bit (value 0 - 1023) digital
Recovery time  µs 100
Accuracy   
-25 °C - 55 °C  % 2
25°C  % 1
06/18/2021 Eaton 106406 ED2021 V80.0 EN 3 / 6