Data Sheet

DATASHEET - LS-11-ZB
Safety position switch, 1N/O+1N/C, insulated material, +actuator ZB,
spring clamp connection
Part no. LS-11-ZB
Catalog No. 106819
Alternate Catalog
No.
LS-11-ZB
EL-Nummer
(Norway)
4356196
Delivery program
Basic function   Position switches
Safety position switches
Part group reference   LS(4)…ZB
Product range   Safety position switches
Degree of Protection   IP66
Features   Complete unit
Ambient temperature  °C -25 - +70
Description   With the actuator inserted, the N/O contact is open and the NC contact is closed.
Contacts
  
N/O = Normally open   1 N/O
N/C = Normally closed  
1 NC
Notes  
= safety function, by positive opening to IEC/EN 60947-5-1
Contact sequence  
Housing   Insulated material
Connection type   Cage Clamp
Notes   Cage-Clamp is a registered trademark of Wago Kontakttechnik, 32432 Minden,
Germany.
Accessories for the Cage-Clamp terminals from Wago:power comb, gray, Wago
Article No. 264-402
Notes Switch must never be used as a mechanical stop!
Actuator can be repositioned for horizontal or vertical mounting.
The operating heads can be turned manually in 90° steps to suit the specified level of actuation.
With the actuator inserted, the N/O contact is open and the N/C contact is closed.
For degree of protection IP65, use V-M20 (206910) cable glands with connecting thread of max. 9 mm length.
Technical data
General
Standards   IEC/EN 60947
Climatic proofing   Damp heat, constant, to IEC 60068-2-78; damp heat, cyclical, to IEC 60068-2-30
Ambient temperature  °C -25 - +70
Mounting position   As required
Degree of Protection   IP66
Terminal capacities 
mm
2

Solid 
mm
2
1 x (0.5 - 1.5)
2 x (0.5 - 1.5)
Flexible with ferrule 
mm
2
1 x (0.5 - 1.5)
2 x (0.5 - 1.5)
Terminal screw   PH1
Tightening torque for terminal screw  Nm 0.4
Repetition accuracy  mm 0.15
06/16/2021 Eaton 106819 ED2021 V80.0 EN 1 / 4