Data Sheet

10.5 Protection against electric shock   Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components   Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections   Is the panel builder's responsibility.
10.8 Connections for external conductors   Is the panel builder's responsibility.
10.9 Insulation properties   
10.9.2 Power-frequency electric strength   Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage   Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material   Is the panel builder's responsibility.
10.10 Temperature rise   The panel builder is responsible for the temperature rise calculation. Eaton will
provide heat dissipation data for the devices.
10.11 Short-circuit rating   Is the panel builder's responsibility. The specifications for the switchgear must be
observed.
10.12 Electromagnetic compatibility   Is the panel builder's responsibility. The specifications for the switchgear must be
observed.
10.13 Mechanical function   The device meets the requirements, provided the information in the instruction
leaflet (IL) is observed.
Technical data ETIM 7.0
Low-voltage industrial components (EG000017) / Emergency stop complete (EC002034)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Command and alarm device / EMERGENCY-STOP pushbutton, complete device
(ecl@ss10.0.1-27-37-12-44 [ACN986011])
Unlocking method   Pull-release
Number of contacts as normally closed contact   1
Number of contacts as normally open contact   0
Degree of protection (IP)   IP66
Mounting method   Built-in
With lighting   No
Hole diameter  mm 22.5
Connection type auxiliary circuit   Screw connection
Diameter cap  mm 38
06/16/2021 Eaton Industries GmbH
http://www.eaton.eu
© 06/2021 by Eaton Industries GmbH
Eaton 110938 ED2021 V80.0 EN
2 / 2