Warranty Guide

ManualsBrandsEaton ManualsLighting Controls1301-7W-L

Terms and Conditions

1. Applicable Terms and Conditions

(a) These terms and conditions of sale establish the rights, obligations, and remedies of Buyer and Seller

that apply to any order issued by Buyer for the purchase of Seller’s products and/or services (“Products”). No additional or

different terms or conditions, whether contained in Buyer’s purchase order form or in any other document or communication

pertaining to Buyer’s order, will be binding on Seller unless accepted in writing by an authorized representative of Seller.

Seller expressly objects to and rejects any additional or different terms and conditions, which shall be ineffective.

(b) If Seller’s order acknowledgement, invoice, other document, or electronic transmittal including or

attaching these terms and conditions is found to be an acceptance of an offer, acceptance is expressly made conditional

upon Buyer's assent solely to these terms and conditions, and acceptance of any part of Products delivered by Seller shall

be deemed to constitute such assent by Buyer. If the order acknowledgement, invoice, other document, or electronic

transmittal including or attaching these terms and conditions constitutes an offer, Buyer's acceptance of the offer is hereby

limited to the terms of the offer.

2. Price, Payment Terms, and Title

(a) All prices represent those in effect at the time of quotation and are subject to change without notice.

Unless prices are bid or quoted as "firm," Seller reserves the right to invoice at prices in effect at the date of shipment,

regardless of any prior bid and whether notice was received by Buyer. Prices are stated in United States dollars unless

otherwise indicated, are exclusive of shipping, handling, shipping insurance, duties, and sales, use, excise or similar taxes.

Export packaging or any other special handling requested by Buyer will be at Buyer’s expense. A service charge of $25 will

be assessed for any order less than $100.

(b) Buyer acknowledges that the pricing of the Products has been set based on the agreed allocation of

risks contained in these terms and conditions. If, notwithstanding the provisions of these terms and conditions, a court of

competent jurisdiction determines that Buyer’s terms and conditions apply to an order, then Seller shall have the right to

either (i) modify the prices (including retroactively) according to the additional level of risk and responsibility that Buyer’s

terms and conditions require Seller to undertake; or (ii) cancel the order any time after such a determination without liability

for the termination other than for the Products already delivered on these terms and conditions.

30 days after delivery or date of invoice, whichever first occurs, in the currency invoiced. Seller reserves the right to modify

or withdraw credit terms at any time without notice. If Buyer fails to fulfill the terms of payment, Seller may defer further

shipments to Buyer or, at its option, cancel the unshipped portions of Buyer's orders. Buyer agrees to pay interest on all

past due invoices at the lesser of 18% per annum, compounded monthly, or the highest contractual rate allowable under the

law.

(d) Until full payment of all obligations of the Buyer for an order, Seller reserves the title (but not the risk of

loss) to all Products furnished under that order. If the Buyer defaults in payment or performance or becomes subject to

insolvency, receivership or bankruptcy proceedings or makes an assignment for the benefit of creditors, or without the

consent of Seller voluntarily or involuntarily sells, transfers, leases or permits any lien or attachment on the Products, Seller

may treat all amounts then or thereafter owing by Buyer to be immediately due and payable and Seller at its election may

repossess Products for which Buyer has not paid in full. In the event of repossession of Products under this section, Buyer

agrees that Seller may enter the premises where the Products may be located and remove them without notice and without

being liable to Buyer for such repossession. Buyer will not set off invoiced amounts or any portion thereof against sums that

are due or may become due from Seller, its parents, affiliates, or subsidiaries. Buyer grants Seller a security interest in all

Products for which title has passed (including all after-acquired Products) that Seller sells Buyer and all proceeds of

Products (including but not limited to all products in which Products are incorporated and any funds and products that Buyer

receives in exchange for Products). Buyer consents to Seller’s execution of any documents to evidence and perfect this

security interest, and agrees to execute the same if requested by Seller.

3. Delivery and Risk of Loss

(a) Unless otherwise agreed in writing, all deliveries of Products will be EXW (Incoterms 2000) Seller’s

facility. Products will be packed in Seller’s standard commercial shipping packages. Charges for shipping may not reflect

net transportation costs paid by Seller. Buyer shall reimburse Seller for all costs of storage and handling incurred by Seller

after the date that Seller is prepared to make shipment.

(b) Delivery and shipping dates are approximate and represent Seller’s best estimate of the time required

to make delivery or shipment. Time is not of the essence with respect to the transactions covered by these terms and

conditions, except with respect to Buyer’s obligation to make all related payments. Seller’s obligations under these terms

and conditions will be dependent upon Seller’s ability to obtain necessary raw materials and components. Seller shall have

the right to make partial deliveries and to ship up to forty (40) days in advance of shipping date.

4. Acceptance

Acceptance shall occur, if not before, when Buyer fails to reject within ten (10) days after delivery of the

Products. Buyer may rightfully reject only when a reasonable inspection shows that the Products fail to conform

substantially to the specifications for the Products. Buyer waives any right to revoke acceptance. Buyer's remedies for any

nonconformity detected after acceptance are limited to those expressly provided in these terms and conditions for breach of

warranty.

5. Limited Warranty

(a) Seller warrants to each original Buyer of Products that Products are, at the time of delivery to the

Buyer, in good working order and conform to Seller’s official published specifications, provided that no warranty is made

with respect to any Products, component parts, or accessories manufactured by others but supplied by Seller.

(b) Seller's obligation under this warranty for any Product proved not to be as warranted within the

applicable warranty period is limited to, at its option, replacing the Product, refunding the purchase price of the Product, or

using reasonable efforts to repair the Product during normal business hours at any authorized service facility of Seller. All

costs of transportation of any Product claimed not to be as warranted and of any repaired or replacement Product to or from

such service facility shall be borne by Buyer.

designated by Seller, transportation prepaid by Buyer, to establish a claim under this warranty. The cost of labor for

removing a Product and for installing a repaired or replacement Product shall be borne by Buyer. Replacement parts

provided under the terms of this warranty are warranted for the remainder of the warranty period of the Products in which

they are installed to the same extent as if such parts were original components. Warranty services provided under these

terms and conditions do not assure uninterrupted operations of Products; Seller shall not be liable for damages caused by

any delays involving warranty service.

(d) The warranty period for Products is twelve (12) months from the date of shipment unless otherwise

agreed by Seller in writing.

(e) EXCEPT FOR THE EXPRESS WARRANTY SET FORTH ABOVE, SELLER PROVIDES PRODUCTS

AS-IS AND MAKES NO OTHER REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, STATUTORY OR

OTHERWISE, REGARDING THE PRODUCTS, THEIR FITNESS FOR ANY PARTICULAR PURPOSE, THEIR

MERCHANTIBILITY, THEIR QUALITY, THEIR NONINFRINGEMENT, OR OTHERWISE. IN NO EVENT SHALL SELLER

BE LIABLE FOR THE COST OF PROCUREMENT OR INSTALLATION OF SUBSTITUTE GOODS.

6. LIMITATION OF LIABILITY

IN NO EVENT WILL SELLER BE LIABLE FOR ANY SPECIAL DAMAGES, CONSEQUENTIAL

DAMAGES, INDIRECT DAMAGES, INCIDENTAL DAMAGES, STATUTORY DAMAGES, EXEMPLARY OR PUNITIVE

DAMAGES, LOSS OF PROFITS, LOSS OF REVENUE, LIQUIDATED DAMAGES, OR LOSS OF USE, EVEN IF

INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. SELLER’S LIABILITY FOR DAMAGES ARISING OUT OF OR

RELATED TO A PRODUCT SHALL IN NO CASE EXCEED THE PURCHASE PRICE OF THE PRODUCT FROM WHICH

THE CLAIM ARISES. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS AND

EXCLUSIONS WILL APPLY WHETHER SELLER’S LIABILITY ARISES OR RESULTS FROM BREACH OF CONTRACT,

BREACH OF WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE, GROSS NEGLIGENCE, MALICE,

OR INTENTIONAL CONDUCT), STRICT LIABILITY, BY OPERATION OF LAW, OR OTHERWISE.

7. Cancellation and Return of Products

Orders shall not be subject to cancellation or modification either in whole or in part without Seller's written

consent and then only with terms that will reimburse Seller for all applicable costs incurred by virtue of the sale, including

costs of purchased materials, engineering costs and a reasonable allowance for profit. Seller's written consent must be

given in advance of Buyer's return of Products for credit. Seller reserves the right to cancel any sale of Products without

liability to Buyer (except for refund of monies already paid), if the manufacture or sale of the goods is or becomes technically

or economically impractical.

8. Force Majeure

Seller shall not be liable for any failure to perform or delay in performing its obligations resulting directly or

indirectly from or contributed to by any acts of God, acts of Buyer or those under Buyer’s control, acts of government or

other civil or military authorities, priorities, strikes, or other labor disputes, fires, accidents, floods, epidemics, war, riot,

embargoes, delays in transportation, lack of or inability to obtain raw materials, components, labor, fuel or supplies, or other

circumstances beyond Seller's reasonable control ("Force Majeure Event"). If Seller elects, the time for performance shall

be extended by a period of time equal to the time lost because of any delays caused by reasons of a Force Majeure Event.

Should Seller be prevented from completing Buyer’s order or any part thereof because of any Force Majeure Event, then

Buyer agrees promptly upon request and upon receipt of invoice therefor, to pay Seller for any Product or Products then

completed.

9. Work Product

"Work Product" shall include, without limitation, all designs, discoveries, creations, works, devices, masks,

models, work in progress, service deliverables, inventions, products, special tooling, computer programs, procedures,

improvements, developments, drawings, notes, documents, business processes, information and materials made,

conceived or developed by Seller alone or with others that result from or relate to the Products. All Work Product shall at all

times be and remain the sole and exclusive property of Seller. Buyer hereby agrees to irrevocably assign and transfer to

Seller and does hereby assign and transfer to Seller all of its worldwide right, title and interest in and to the Work Product

including all associated intellectual property rights. Buyer hereby waives any and all moral and other rights in any Work

Product or any other intellectual property created, developed or acquired in respect of the Products. Seller will have the

sole right to determine the treatment of any Work Product, including the right to keep it as trade secret, execute and file

patent applications on it, to use and disclose it without prior patent application, to file registrations for copyright or trademark

in its own name or to follow any other procedure that Seller deems appropriate. All tools and equipment supplied by Buyer

to Seller shall remain the sole property of Seller.

10. Confidentiality

(a) Buyer may acquire knowledge of Seller Confidential Information (as defined below) in connection with

Products and/or its performance hereunder and agrees to keep Seller Confidential Information in confidence during and

following termination or expiration of this Agreement. "Seller Confidential Information" includes but is not limited to all

information, whether written or oral, in any form, including, without limitation, information relating to the research,

development, products, methods of manufacture, trade secrets, business plans, customers, vendors, finances, personnel

data, Work Product, and other material or information considered proprietary by Seller relating to the current or anticipated

business or affairs of Seller that is disclosed directly or indirectly to Buyer. In addition, Seller Confidential Information means

any third party's proprietary or confidential information disclosed to Buyer in the course of providing Products to Buyer.

(b) Buyer agrees not to copy, alter or directly or indirectly disclose any Seller Confidential Information.

Additionally, Buyer agrees to limit its internal distribution of Seller Confidential Information to Buyer‘s employees who have a

need to know, and to take steps to ensure that the dissemination is so limited. In no event will Buyer use less than the

degree of care and means that it uses to protect its own information of like kind, but in any event not less than reasonable

care to prevent the unauthorized use of Seller Confidential Information. Buyer may disclose Seller Confidential Information

that is required to be disclosed pursuant to a requirement of a government agency or law but only after Buyer provides

prompt notice to Seller of such requirement and gives Seller the opportunity to challenge or limit the scope of the disclosure.

hereunder and will not use such Seller Confidential Information for its own benefit or for the benefit of any third party. All

Seller Confidential Information is and shall remain the property of Seller. Upon Seller’s written request, Buyer shall return,

transfer or assign to Seller all Seller Confidential Information, including all Work Product, and all copies containing Seller

Confidential Information.

11. Patent Indemnity

In the event any Product is made in accordance with drawings, samples or manufacturing

specifications designated by Buyer, Buyer agrees to indemnify, defend, and hold Seller harmless from any and all damages,

costs and expenses (including attorney's fees) relating to any claim arising from or relating to the design, distribution,

manufacture, marketing, sale, or use of the Product or arising from or relating to a claim that such Product furnished to

Buyer by Seller, or the use thereof, infringes any claim of any patent, foreign or domestic, and Buyer agrees at its own

expense to undertake the defense of any suit against Seller brought upon such claim or claims.

12. Changes in Product Design or Manufacture

Seller shall have the right to change, discontinue or modify the design and construction of

any of its products and to substitute material equal to or superior to that originally specified.

13. Software License

Software, if included with a Product, is hereby licensed and not sold. The license is nonexclusive, and is

limited to use with the Product with which it is included. No other use is permitted and Seller retains for itself (or, if

applicable, its suppliers) all title and ownership to any software delivered hereunder, all of which contains confidential and

proprietary information and which ownership includes without limitation all rights in patents, copyrights, trademarks and

trade secrets. Buyer shall not attempt any sale, transfer, sublicense, reverse compilation or disassembly (save to the extent

expressly permitted by law) or redistribution of the software. Buyer shall not copy, disclose or display any such software, or

otherwise make it available to others.

14. Compliance with Laws

Buyer shall comply with all laws and regulations applicable to Products, including but not limited to all

applicable import and export laws and regulations. Buyer and Buyer’s Agent shall provide all information requested by

Seller relating to Seller’s voluntary or mandatory compliance with any law or regulation, and Buyer shall indemnify Seller for

any losses incurred by Seller arising from Buyer’s or Buyer’s Agent’s failure to provide the information requested by Seller.

15. Waiver

No waiver of any provision of these terms and conditions (or any right or default hereunder) shall be

effective unless in writing and signed by an authorized representative Seller. Any such waiver shall be effective only for the

instance given, and shall not operate as a waiver with respect to any other rights or obligations under these terms and

conditions or applicable law in connection with any other instances or circumstances.

16. Language

The parties have expressly required that these terms and conditions be prepared in the English language.

Les parties aux présentes ont expressément exigé que les présents termes et les bons de commandes émis aux termes

des présentes soient rédigés en langue Anglaise.

17. Choice of Law and Dispute Resolution

Except as set forth below, these terms and conditions shall be governed by and construed in accordance

with the laws of the State of Texas, without reference to its choice of law rules. If both Seller and Buyer are incorporated

under the laws of Canada or a province of Canada, these terms and conditions shall be governed by and construed in

accordance with the laws of the Province of Ontario and the federal laws of Canada. If Buyer is incorporated in the United

States, any claim or litigation arising out of or relating to Products shall be brought exclusively in a court of competent

jurisdiction in Harris County, Texas. If Buyer is incorporated outside of the United States, any dispute will be resolved by

arbitration in Houston, Texas, by three arbitrators and under the International Chamber of Commerce Rules of Arbitration. The

language of the arbitration will be English. In all cases, Buyer and Seller expressly exclude from application the United

Nations Convention on Contracts for the International Sale of Goods.

18. Assignment

Buyer may not assign, transfer or subcontract the performance of its services, or any of its rights and/or

obligations hereunder, without Seller’s prior written consent.

19. Severability

If any provision of these terms and conditions is determined to be illegal, invalid, or unenforceable, the

validity and enforceability of the remaining provisions of these terms and conditions will not be affected and, in lieu of such

illegal, invalid, or unenforceable provision, there will be added, as part of these terms and conditions, one or more

provisions as similar in terms as may be legal, valid and enforceable under applicable law. CWD 022311