Cut Sheet

Volume 8—Sensing Solutions CA08100010E—July 2015 www.eaton.com V8-T5-75
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5.6
Photoelectric Sensors
Prism Series Sensors
Wiring Diagrams
Pin numbers are for reference, rely on pin location when wiring.
Thru-Beam Sensors
See Prism Series wiring diagrams below for details on
wiring power and output.
Prism Series Sensors
AC/DC Models
12
All AC/DC Models (except Thru-Beam)
AC/DC Thru-Beam Wiring
AC/DC Isolated Output Options
DC Models
123
All DC Models (except Thru-Beam)
DC Thru-Beam Wiring
DC Isolated Output Options
Notes
1
Cable versions: The color codes are the actual wire colors emanating from the sensor.
2
Connector versions: The pin numbering and wire colors, shown in ( ), are typical of several
manufacturers, however, variations are possible. In case of discrepancies, rely on function
indicated and pin location rather than pin number or wire color.
3
Sensor operates on DC voltage, but isolated output can switch AC or DC loads.
Brown
Blue
White
Prism
Detector
Black
Prism
Source
Violet
Orange
Violet
Orange
Sync +
Sync –
Input Power Output
Brown
Blue
White
Connector Version-Face View Male
Cable Version
AC/DC
Prism
Black
See
Output
Options
Below
See
Output
Options
Below
L2 or (–)
L1 or +V
AC 20 to 132 V
or DC 15 to 30 V
L2 or (–)
L1 or +V
4
1
2
3
(Red/White)
(Red/Black)
(Green)
(Red)
Brown
Blue
Orange: Sync –
Connector Version-Face View Male
Cable Version
Prism
Detector
Violet: Sync +
L2 or (–)
L1 or +V
AC 20 to 132 V
or DC 15 to 30 V
L2 or (–)
L1 or +V
4
1
2
3
(Red/White)
(Red/Black)
(Green)
(Red)
AC/DC
Prism
Source
Black
White
See
Output
Options
4
1
2
3
See
Output
Options
(Green)
(Red)
Prism Source
(Red/Black)
(Red/White)
Sync –
Sync +
Prism Detector
(–)
+V
Black (Pin 3)
White (Pin 4)
DC NPN (Sink)
Load
DC PNP (Source)
Load
L2
L1
AC Load
Maximum:
110 mA @
132 Volts
Load
Black (Pin 3)
White (Pin 4)
Black (Pin 3)
White (Pin 4)
Maximum:
80 mA @
132 Volts
Black wires are shown as switched output, however black and gray wires are bidirectional.
( - )
+V
Brown
Blue
DC 10 to 30 V
Connector Version-Face View Male
( - )
+V
Cable Version
DC
Prism
Black
See
Output
Options
Below
See
Output
Options
Below
4
1
3
2
See
Output
Options
Below
(Blue)
(Brown)
(White)
(Black)
Brown
Blue
Orange: Sync –
Connector Version-Face View Male
Cable Version
Prism
Detector
Violet: Sync +
( - )
+V
( - )
+V
DC
Prism
Source
Black
White
See
Output
Options
Prism Source
Sync +
Sync –
Prism Detector
DC 10 to 30 V
(Blue)
(Brown)
(White)
(Black)
4
1
3
2
4
1
3
2
(Brown)
(Blue)
(White)
(Black)
See
Output
Options
( - )
+V
Black (Pin 4)
White (Pin 2)
DC NPN (Sink)
Load
DC PNP (Source)
Load
L2
L1
AC Load
(Isolated from DC Sensor Power)
Maximum:
110 mA @
132 Volts
Load
Black (Pin 4)
White (Pin 2)
Black (Pin 4)
White (Pin 2)
Maximum:
80 mA @
132 Volts
Black wires are shown as switched output, however black and gray wires are bidirectional.