User manual

2 Control unit
2.4 Extended parameter set
DC1 Variable Frequency Drives 11/16 MN04020004Z-EN www.eaton.com 9
2.4 Extended parameter set
Table 5: Enabling and disabling access to the extended parameter set
Commands
Description
Enabling access to the extended parameter set
Press the OK button and hold it down for two seconds in
order to access the parameter interface
→ The display will show the parameter that was last
used.
Use the ▲ and ▼ buttons to select parameter P-14
Press the OK button.
Use the ▲ and ▼ buttons to enter the password set with
P-37 (default setting: 101)
Press the OK button to confirm
→
The extended parameter set (parameters > P-14 and
display values P00-…) will now be available.
Disabling access to the extended parameter set
Use the ▲ and ▼ buttons to set a value for P-14 that does
not match the password (P-37).
Press the OK button to confirm
→
Only the “basic parameters”, i.e., parameters P-01 to
P-14, will be accessible now.