Data Sheet

Approvals   
Approvals   cUL 61010-2-201
shipping classification   DNV GL
  
Applied standards and directives   
EMC   2004/108/EEC
Emitted interference   IEC/EN 61000-6-4
Interference immunity   IEC/EN 61000-6-2
Product standards   EN50178/IEC/EN 61131-2
Mechanical shock resistance  g 15g / 11ms
Vibration   5...9 Hz +- 3.5 mm
9...60 Hz +- 0.15 mm
60…150 Hz ± 2 g
Free fall, packaged  m IEC/EN 60068-2-31
RoHS   conform
Environmental conditions
Climatic environmental conditions   
Climatic proofing   Cold to EN 60068-2-1
Dry heat to IEC 60068-2-2
Damp heat as per EN 60068-2-3
Air pressure (operation)  hPa 795 - 1080
Temperature   
Storage / Transport ϑ °C -20 - +60
Operating ambient temperature min.  °C 0
Operating ambient temperature max.  °C + 50
Relative humidity   
Condensation   Non-condensing
Relative humidity   10 - 95%, non-condensing
Design verification as per IEC/EN 61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 0
Heat dissipation per pole, current-dependent P
vid
W 0
Equipment heat dissipation, current-dependent P
vid
W 0
Static heat dissipation, non-current-dependent P
vs
W 14.4
Heat dissipation capacity P
diss
W 0
Operating ambient temperature min.  °C 0
Operating ambient temperature max.  °C 50
Degree of Protection   IP65 (in the front as per EN 60529-1), IP20 (on rear as per EN 60529-1)
NEMA 4X
IEC/EN 61439 design verification   
10.2 Strength of materials and parts   
10.2.2 Corrosion resistance   Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures   Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat   Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   Please enquire
10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions   Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES   Meets the product standard's requirements.
10.4 Clearances and creepage distances   Meets the product standard's requirements.
06/16/2021 Eaton 179649 ED2021 V80.0 EN 3 / 7