Data Sheet

ManualsBrandsEaton ManualsAutomationFrequency inverter DC1-34030FB-A20CE1 15 kW 3-phase

DATASHEET - DC1-34030FB-A20CE1

Variable frequency drive, 400 V AC, 3-phase, 30 A, 15 kW, IP20/NEMA 0,

Brake chopper, braking transistor, FS4

Part no. DC1-34030FB-A20CE1

Catalog No. 185780

Alternate Catalog

No.

DC1-34030FB-A20CE1



Delivery program

Product range   Variable frequency drives

Part group reference (e.g. DIL)   DC1

Rated operational voltage U

 400 V AC, 3-phase

480 V AC, 3-phase

Output voltage with V

 400 V AC, 3-phase

480 V AC, 3-phase

Mains voltage (50/60Hz) U

V 380 (-10%) - 480 (+10%)

Rated operational current

  

At 150% overload I

A 30

Note   Rated operational current at a switching frequency of 8 kHz and an ambient air

temperature of +50°C

Assigned motor rating

  

Note   for normal internally and externally ventilated 4 pole, three-phase asynchronous

motors with 1500 rpm

-1

at 50 Hz or 1800 min

-1

at 60 Hz

Note   Overload cycle for 60 s every 600 s

Note   at 400 V, 50 Hz

150 % Overload P kW 15

150 % Overload I

A 30

Note   at 440 - 480 V, 60 Hz

150 % Overload P HP 20

150 % Overload I

A 30

Degree of Protection   IP20/NEMA0

Interface/ﬁeld bus (built-in)   OP-Bus (RS485)/Modbus RTU, CANopen®

Fieldbus connection (optional)   SmartWire-DT

Fitted with   Radio interference suppression ﬁlter

Brake chopper

7-digital display assembly

Additional PCB protection

Parameterization   Keypad

Fieldbus

drivesConnect

drivesConnect mobile (App)

Frame size   FS4

Connection to SmartWire-DT   yes

in conjunction with DX-NET-SWD3 SmartWire DT module

Technical data

General

Standards   Speciﬁcation for general requirements: IEC/EN 61800-2

EMC requirements: IEC/EN 61800-3

Safety requirements: IEC/EN 61800-5-1

Certiﬁcations   CE, UL, cUL, RCM, Ukr SEPRO, EAC

Production quality   RoHS, ISO 9001

Climatic prooﬁng ρ

% < 95%, average relative humidity (RH), non-condensing, non-corrosive

Air quality   3C2, 3S2

Ambient temperature   

Operating ambient temperature min.  °C -10

Operating ambient temperature max.  °C + 50

   operation (with 150 % overload)

06/16/2021 Eaton 185780 ED2021 V80.0 EN 1 / 6

Summary of content (6 pages)

PAGE 1
DATASHEET - DC1-34030FB-A20CE1 Variable frequency drive, 400 V AC, 3-phase, 30 A, 15 kW, IP20/NEMA 0, Brake chopper, braking transistor, FS4 Part no. Catalog No. Alternate Catalog No. DC1-34030FB-A20CE1 185780 DC1-34030FB-A20CE1 Delivery program Product range Variable frequency drives Part group reference (e.g.
PAGE 2
Storage ϑ °C -40 - +60 Radio interference level Radio interference class (EMC) C2, C3, depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression ﬁlters (optional) may be necessary. Environment (EMC) 1st and 2nd environments as per EN 61800-3 maximum motor cable length I m Mounting position C2 ≤ 5 m C3 ≤ 25 m Vertical Altitude m 0 - 1000 m above sea level Above 1000 m: 1% derating for every 100 m max.
PAGE 3
Additional PCB protection Frame size FS4 Motor feeder Note for normal internally and externally ventilated 4 pole, three-phase asynchronous Note Overload cycle for 60 s every 600 s Note at 400 V, 50 Hz 150 % Overload -1 -1 motors with 1500 rpm at 50 Hz or 1800 min at 60 Hz P kW Note 15 at 440 - 480 V, 60 Hz 150 % Overload P HP 20 maximum permissible cable length I m screened: 100 screened, with motor choke: 200 unscreened: 150 unscreened, with motor choke: 300 Apparent power at rated
PAGE 4
Design veriﬁcation as per IEC/EN 61439 Technical data for design veriﬁcation Rated operational current for speciﬁed heat dissipation In A 30 Heat dissipation per pole, current-dependent Pvid W 0 Equipment heat dissipation, current-dependent Pvid W 607 Static heat dissipation, non-current-dependent Pvs W 0 Heat dissipation capacity Pdiss W 0 Operating ambient temperature min. °C -10 Operating ambient temperature max.
PAGE 5
Number of digital inputs 4 With control unit Yes Application in industrial area permitted Yes Application in domestic- and commercial area permitted Yes Supporting protocol for TCP/IP No Supporting protocol for PROFIBUS No Supporting protocol for CAN Yes Supporting protocol for INTERBUS No Supporting protocol for ASI No Supporting protocol for KNX No Supporting protocol for MODBUS Yes Supporting protocol for Data-Highway No Supporting protocol for DeviceNet No Supporting protocol f
PAGE 6
Max. Voltage Rating 3~ 240 V AC IEC: TN-S UL/CSA: "Y" (Solidly Grounded Wey) Degree of Protection IEC: IP20 Dimensions 06/16/2021 Eaton Industries GmbH http://www.eaton.eu © 06/2021 by Eaton Industries GmbH Eaton 185780 ED2021 V80.