Data Sheet

Flammability characteristics   
Glow wire test   
Flammability characteristics   960 °C/1mm thickness (base, cover; glow wire to VDE 0471 Part 2)
650 °C/1mm thick (push-through membrane) to VDE 0471 Part 2)
to UL 94   VO/1.5 mm thickness
to UL 94   HB
Halogen free   Yes
Design verification as per IEC/EN 61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 0
Heat dissipation per pole, current-dependent P
vid
W 0
Equipment heat dissipation, current-dependent P
vid
W 0
Static heat dissipation, non-current-dependent P
vs
W 0
Heat dissipation capacity P
diss
W 25.5
Operating ambient temperature min.  °C -25
Operating ambient temperature max.  °C 70
Degree of Protection   Front IP65
IP65, with push-through cable entry
Max. radiated heat dissipation with separate mounting, ambient air
temperature +20 °C
 W 25.5
Flammability characteristics   960 °C/1mm thickness (base, cover; glow wire to VDE 0471 Part 2)
650 °C/1mm thick (push-through membrane) to VDE 0471 Part 2)
Track resistance   CTI 175 (base, to IEC 60112)
CTI 175 (cover, to IEC 60112)
Surface treatment   Resistant to corrosion
Impact resistance   IK06 according to EN 50102
Temperature resistant   -40 °C - 120 °C (enclosure)
-40 °C - +80 °C (gasket)
UV resistance   Beneath protective shield
IEC/EN 61439 design verification   
10.2 Strength of materials and parts   
10.2.2 Corrosion resistance   Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures   Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat   Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   Please enquire
10.2.5 Lifting   Not applicable.
10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions   Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES   Meets the product standard's requirements.
10.4 Clearances and creepage distances   Meets the product standard's requirements.
10.5 Protection against electric shock   Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components   Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections   Is the panel builder's responsibility.
10.8 Connections for external conductors   Is the panel builder's responsibility.
10.9 Insulation properties   
10.9.2 Power-frequency electric strength   Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage   Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material   Meets the product standard's requirements.
10.10 Temperature rise   The panel builder is responsible for the temperature rise calculation. Eaton will
provide heat dissipation data for the devices.
10.11 Short-circuit rating   Is the panel builder's responsibility. The specifications for the switchgear must be
observed.
10.12 Electromagnetic compatibility   Is the panel builder's responsibility. The specifications for the switchgear must be
observed.
10.13 Mechanical function   The device meets the requirements, provided the information in the instruction
leaflet (IL) is observed.
06/16/2021 Eaton 206885 ED2021 V80.0 EN 3 / 4