Data Sheet

ManualsBrandsEATON ManualsCircuit BreakersLimit switch 20 A 1 x 90 ° Grey, Black T0-1-102/I1 1 pc(s)

DATASHEET - T0-1-102/I1

On-Oﬀ switch, T0, 20 A, surface mounting, 1 contact unit(s), 2 pole, with

black thumb grip and front plate

Part no. T0-1-102/I1

Catalog No. 207061



EL-Nummer

(Norway)

0001456243

Delivery program

Product range   On-Oﬀ switch

Part group reference   T0

   with black thumb grip and front plate

Number of poles   2 pole

Degree of Protection   IP65

  

Design   surface mounting

  

Contact sequence  

Switching angle  ° 90

Switching performance   maintained

Design number   102

Front plate no.  

front plate   0-1

Motor rating AC-23A, 50 - 60 Hz

  

400 V P kW 5.5

Rated uninterrupted current I

A 20

Note on rated uninterrupted current !

  Rated uninterrupted current I

is speciﬁed for max. cross-section.

Number of contact units  contact

unit(s)

Technical data

General

Standards   IEC/EN 60947, VDE 0660, IEC/EN 60204

Switch-disconnector according to IEC/EN 60947-3

Climatic prooﬁng   Damp heat, constant, to IEC 60068-2-78

Damp heat, cyclic, to IEC 60068-2-30

Ambient temperature   

Enclosed  °C -25 - +40

06/16/2021 Eaton 207061 ED2021 V80.0 EN 1 / 6

Summary of content (6 pages)

PAGE 1
DATASHEET - T0-1-102/I1 On-Oﬀ switch, T0, 20 A, surface mounting, 1 contact unit(s), 2 pole, with black thumb grip and front plate Delivery program Part no. Catalog No. T0-1-102/I1 207061 EL-Nummer (Norway) 0001456243 Product range On-Oﬀ switch Part group reference T0 with black thumb grip and front plate Number of poles 2 pole Degree of Protection IP65 Design surface mounting Contact sequence Switching angle ° 90 Switching performance maintained Design number 102 Front plate no.
PAGE 2
Overvoltage category/pollution degree Rated impulse withstand voltage III/3 Uimp Mechanical shock resistance V AC 6000 g 15 Mounting position As required Contacts Mechanical variables Number of poles 2 pole Electrical characteristics Rated operational voltage Ue V AC 690 Rated uninterrupted current Iu A 20 Note on rated uninterrupted current !u Rated uninterrupted current Iu is speciﬁed for max. cross-section.
PAGE 3
Motor rating AC-23A, 50 - 60 Hz P kW 230 V P kW 3 400 V 415 V P kW 5.5 500 V P kW 7.5 690 V P kW 5.5 230 V Ie A 13.3 400 V 415 V Ie A 13.3 500 V Ie A 13.3 690 V Ie A 7.
PAGE 4
Equipment heat dissipation, current-dependent Pvid W 0 Static heat dissipation, non-current-dependent Pvs W 0 Heat dissipation capacity Pdiss W 0 Operating ambient temperature min. °C -25 Operating ambient temperature max. °C 40 IEC/EN 61439 design veriﬁcation 10.2 Strength of materials and parts 10.2.2 Corrosion resistance Meets the product standard's requirements. 10.2.3.1 Veriﬁcation of thermal stability of enclosures Meets the product standard's requirements. 10.2.3.
PAGE 5
Number of auxiliary contacts as normally open contact 0 Number of auxiliary contacts as change-over contact 0 Motor drive optional No Motor drive integrated No Voltage release optional No Device construction Complete device in housing Suitable for ground mounting Yes Suitable for front mounting 4-hole No Suitable for front mounting centre No Suitable for distribution board installation No Suitable for intermediate mounting No Colour control element Black Type of control element Togg
PAGE 6
Drilling dimensions base 06/16/2021 Eaton Industries GmbH http://www.eaton.eu © 06/2021 by Eaton Industries GmbH Eaton 207061 ED2021 V80.