Data Sheet

Phase-failure sensitivity   IEC/EN 60947-4-1, VDE 0660 Part 102
Rating data for approved types
Switching capacity   
Maximum motor rating   
Three-phase   
200 V
208 V
 HP Hinweis: Motorleistung in diesem Bereich nach Bemessungsstrom berechnen.
Angegebene Werte nach NEC Table 430-150
230 V
240 V
 HP Hinweis: Motorleistung in diesem Bereich nach Bemessungsstrom berechnen.
Angegebene Werte nach NEC Table 430-150
460 V
480 V
 HP Hinweis: Motorleistung in diesem Bereich nach Bemessungsstrom berechnen.
Angegebene Werte nach NEC Table 430-150
575 V
600 V
 HP Hinweis: Motorleistung in diesem Bereich nach Bemessungsstrom berechnen.
Angegebene Werte nach NEC Table 430-150
Short Circuit Current Rating, type E  SCCR 
240 V  kA 65
480Y / 277V  kA 65
600Y / 347V  kA 50
Accessories required   BK25/3-PKZ0-E
Short Circuit Current Rating, group protection  SCCR 
600 V High Fault   
SCCR (fuse)  kA 50
max. Fuse  A 600
SCCR (CB)  kA 50
max. CB  A 600
Design verification as per IEC/EN 61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 0.63
Heat dissipation per pole, current-dependent P
vid
W 1.72
Equipment heat dissipation, current-dependent P
vid
W 5.16
Static heat dissipation, non-current-dependent P
vs
W 0
Heat dissipation capacity P
diss
W 0
Operating ambient temperature min.  °C -25
Operating ambient temperature max.  °C 55
IEC/EN 61439 design verification   
10.2 Strength of materials and parts   
10.2.2 Corrosion resistance   Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures   Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat   Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   Meets the product standard's requirements.
10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions   Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES   Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances   Meets the product standard's requirements.
10.5 Protection against electric shock   Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components   Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections   Is the panel builder's responsibility.
10.8 Connections for external conductors   Is the panel builder's responsibility.
10.9 Insulation properties   
10.9.2 Power-frequency electric strength   Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage   Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material   Is the panel builder's responsibility.
10.10 Temperature rise   The panel builder is responsible for the temperature rise calculation. Eaton will
provide heat dissipation data for the devices.
06/18/2021 Eaton 229831 ED2021 V80.0 EN 3 / 10