Data Sheet

DATASHEET - Z-SCH230/25-04
Installation contactor, 230VAC/50Hz, 4 N/C, 25A, 2HP
Part no. Z-SCH230/25-04
Catalog No. 248848


Similar to illustration
Design verification as per IEC/EN 61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 25
Heat dissipation per pole, current-dependent P
vid
W 0
Equipment heat dissipation, current-dependent P
vid
W 8
Static heat dissipation, non-current-dependent P
vs
W 0
Heat dissipation capacity P
diss
W 0
Operating ambient temperature min.  °C -40
Operating ambient temperature max.  °C 60
   0
Technical data ETIM 7.0
Devices for distribution board-/surface mounting (EG000062) / Installation contactor for distribution board (EC001653)
Electric engineering, automation, process control engineering / Electrical installation, device / Modular serial built-in device for electrical circuit distributors / Installation contactor for
distribution board (ecl@ss10.0.1-27-14-23-08 [AFZ820015])
Rated operating voltage  V 440 - 440
Rated operation current  A 25
Utility category   1
Rated excitation voltage  V 230 - 230
Voltage type (operating voltage)   AC
Voltage type (excitation voltage)   AC
Number of contacts as normally open contact   0
Number of contacts as normally closed contact   4
Max. incandescent lamp load  W 3000
Max. load fluorescent lamp  VA 1160
Max. load fluorescent lamp (Duo circuit)  VA 2552
Max. load fluorescent lamp (parallel compensated)  VA 1044
Slider for hand switch   No
Number of modular spacings   2
Built-in depth  mm 60
Additional equipment possible   Yes
Degree of protection (IP)   IP40
06/16/2021 Eaton Industries GmbH
http://www.eaton.eu
© 06/2021 by Eaton Industries GmbH
Eaton 248848 ED2021 V80.0 EN
1 / 1