Data Sheet

Design verification as per IEC/EN 61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 0
Heat dissipation per pole, current-dependent P
vid
W 0
Equipment heat dissipation, current-dependent P
vid
W 0
Static heat dissipation, non-current-dependent P
vs
W 0.5
Heat dissipation capacity P
diss
W 0
Operating ambient temperature min.  °C 0
Operating ambient temperature max.  °C 55
IEC/EN 61439 design verification   
10.2 Strength of materials and parts   
10.2.2 Corrosion resistance   Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures   Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat   Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   Meets the product standard's requirements.
10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions   Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES   Meets the product standard's requirements.
10.4 Clearances and creepage distances   Meets the product standard's requirements.
10.5 Protection against electric shock   Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components   Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections   Is the panel builder's responsibility.
10.8 Connections for external conductors   Is the panel builder's responsibility.
10.9 Insulation properties   
10.9.2 Power-frequency electric strength   Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage   Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material   Is the panel builder's responsibility.
10.10 Temperature rise   The panel builder is responsible for the temperature rise calculation. Eaton will
provide heat dissipation data for the devices.
10.11 Short-circuit rating   Is the panel builder's responsibility.
10.12 Electromagnetic compatibility   Is the panel builder's responsibility.
10.13 Mechanical function   The device meets the requirements, provided the information in the instruction
leaflet (IL) is observed.
Technical data ETIM 7.0
PLC's (EG000024) / PLC analogue I/O-module (EC001420)
Electric engineering, automation, process control engineering / Control / Programmable logic control (SPS) / SPS analog input/output module (ecl@ss10.0.1-27-24-22-01 [AKE524014])
Number of analogue inputs   8
Number of analogue outputs   0
Analogue inputs configurable   Yes
Analogue outputs configurable   Yes
Input, current   Yes
Input, voltage   No
Input, resistor   No
Input, resistance thermometer   No
Input, thermocouple   No
Input signal, configurable   No
Resolution of the analogue inputs  Bit 12
Output, current   No
Output, voltage   No
Output signal configurable   No
Resolution of the analogue outputs  Bit 0
Type of electric connection   Screw-/spring clamp connection
06/18/2021 Eaton 262549 ED2021 V80.0 EN 2 / 4