Data Sheet

DATASHEET - Z-S7/SS
Impulse relay, 8DC, 2S, 16A, 50Hz, 1SU
Part no. Z-S7/SS
Catalog No. 265281


Similar to illustration
Design verification as per IEC/EN 61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 16
Heat dissipation per pole, current-dependent P
vid
W 1.5
Equipment heat dissipation, current-dependent P
vid
W 3
Operating ambient temperature min.  °C -20
Operating ambient temperature max.  °C 45
Technical data ETIM 7.0
Devices for distribution board-/surface mounting (EG000062) / Latching relay (EC000188)
Electric engineering, automation, process control engineering / Electrical installation, device / Modular serial built-in device for electrical circuit distributors / Latching relay for distribution
board (ecl@ss10.0.1-27-14-23-06 [AFZ818015])
Function   Other
Mounting method   DIN rail
Width in number of modular spacings   1
Built-in depth  mm 60
Number of contacts as normally open contact   2
Number of contacts as normally closed contact   0
Number of contacts as change-over contact   0
Control voltage 1  V 8 - 8
Type of control voltage 1   DC
Frequency control voltage 1  Hz 50 - 50
Control voltage 2  V 0 - 0
Type of control voltage 2   DC
Frequency control voltage 2  Hz 0 - 0
Rated switch current  A 16
Supply voltage  V 250 - 250
Voltage type of supply voltage   AC
Max. incandescent lamp load  W 0
Max. load fluorescent lamp  VA 0
Max. load fluorescent lamp (Duo circuit)  VA 0
Max. load fluorescent lamp (parallel compensated)  VA 0
Max. switching current (cos phi = 0.6)  A 0
Manual operation possible   Yes
06/16/2021 Eaton Industries GmbH
http://www.eaton.eu
© 06/2021 by Eaton Industries GmbH
Eaton 265281 ED2021 V80.0 EN
1 / 1