User`s guide

39
Powerware
®
5115 Tower UPS (500–1400 VA) User’s Guide S 05146640 Rev C www.powerware.com
Chapter 8 Troubleshooting
This section explains:
쑺 UPS alarms and conditions
쑺 How to silence an alarm
쑺 Site wiring fault on 120V models
쑺 Service and support
Audible Alarms and UPS Conditions
The UPS has an audible alarm feature to alert you of potential power
problems.UseTable9todetermineandresolvetheUPSalarmsand
conditions.
On/Off Button
Test/Alarm Reset Button
Power On Indicator (Green)
On Battery Indicator (Yellow)
Overload Indicator (Red)
Service Indicator (Red)
Flashing
Unlit
Lit
Indicator Legend
Figure 16. UPS Front Panel
Silencing an Audible Alarm
Before silencing an alarm, check the alarm condition and perform the
applicable action to resolve the condition (see Table 9). To silence the
alarm for an existing fault, press the
button. If UPS status changes,
the alarm beeps, overriding the previous alarm silencing. The alarm does
not silence if there is a UPS fault, low battery condition, or if the battery
needs to be replaced.