Power Supply User Manual
Eaton 9155 at-a-glance
Model Selection Table - Eaton 9155 UPS (8–15 kVA)
Order Number
1
Description
Power Rating
2
(kVA/kW)
Input & Output
Connection
4
Output Receptacles
Dimensions
H x W x D
5
(in)
Unit
Weight
3
(lb)
K4081100000 PW9155 Model 8 - 32 Battery (2-high) 8/7.2 Hardwired See PDM chart 32.2 x 12.0 x 32.0 352
K4081200000 PW9155 Model 8 - 64 Battery (3-high) 8/7.2 Hardwired See PDM chart 47.8 x 12.0 x 32.0 590
K4081300000 PW9155 Model 8 - 32 Battery with Transformer (3-high) 8/7.2 Hardwired See PDM chart 47.8 x 12.0 x 32.0 558
K4101100000 PW9155 Model 10 - 32 Battery (2- high) 10/9 Hardwired See PDM chart 32.2 x 12.0 x 32.0 352
K4101200000 PW9155 Model 10 - 64 Battery (3- high) 10/9 Hardwired See PDM chart 47.8 x 12.0 x 32.0 590
K4101300000 PW9155 Model 10 - 32 Battery with Transformer (3-high) 10/9 Hardwired See PDM chart 47.8 x 12.0 x 32.0 558
K4121100000 PW9155 Model 12 - 32 Battery (2-high) 12/10.8 Hardwired See PDM chart 32.2 x 12.0 x 32.0 352
K4121200000 PW9155 Model 12 - 64 Battery (3-high) 12/10.8 Hardwired See PDM chart 47.8 x 12.0 x 32.0 590
K4121300000 PW9155 Model 12 - 32 Battery with Transformer (3-high) 12/10.8 Hardwired See PDM chart 47.8 x 12.0 x 32.0 558
K4151100000 PW9155 Model 15 - 32 Battery (2- high) 15/13.5 Hardwired See PDM chart 32.2 x 12.0 x 32.0 352
K4151200000 PW9155 Model 15 - 64 Battery (3- high) 15/13.5 Hardwired See PDM chart 47.8 x 12.0 x 32.0 590
K4151300000 PW9155 Model 15 - 32 Battery with Transformer. (3- high) 15/13.5 Hardwired See PDM chart 47.8 x 12.0 x 32.0 558
1. 50/60 Hz auto-sensing. All models can be used for frequency/phase conversion with de-rated 80% load. Please refer to manual for details.
2. Input voltage 200–240V with neutral or with optional input isolation transformer. Output voltages are user-selectable 100/200, 110/220,
120/240 Vac 180° phase displacement, or 120/208, 127/220 Vac 120° phase displacement.
3. Weight is installed weight; add 47 lbs (2-high models) or 50 lbs (3-high models) to determine shipping weight.
4. An input neutral is required for all configurations unless the input isolation transformer is used.
5. Depth increases to 33.7" when unit is configured with a PDM.
Four button graphical
LCD with backlight
X-Slot Communication Bay #1
Fans
Signal Input 1
Signal Input 2
REPO (normally open)
REPO (normally closed)
X-Slot Communication Bay #2
DB-9 Communication Port
Relay Contact
Internal batteries on slide
out trays (field-replaceable)
Front view of 3-high module
with cover off
6 EATON CORPORATION 9155 UPS