Installation Guide

MATERIAL CHARACTERISTICS
• Environmental: Flammability meets UL 94 requirements; V2 rated
• Temperature Rating: 0ºC to 40ºC (32°F to 104°F)
TESTING & CODE COMPLIANCE
• cULus Listed to UL1472, file no. E47967 & CSA
standard C22.2, no. 184.1
• NOM Certified
• Digital circuitry provides aesthetically pleasing
soft-on/fade-off that extends lamp life.
• Neutral is not required for installation of device
(
excluding Fluorescent Dimmer models).
• Incandescent and Magnetic Low-Voltage
offered in single unit version.
• Installation speed enhancements include
virtually unbreakable, ultrasonically welded
top and backbody, extra-long, extra-wide
mounting straps and easy access ground
screws.
• Air-gap switch disconnects power from load,
forcing an OFF condition.
• Radio Frequency Interference (RFI) filtering for
radio, audio and video equipment.
• Power failure memory.
• Electrostatic discharge protection.
• Square Law Dimming – perceived dimming
level is proportional to the slider position.
• Compatible with any decorator wallplate.
FEATURES
• Electro-mechanical push pad for ON/OFF
operation with separate DIM/BRIGHT bar.
• Push pad design provides minimal travel and
crisp actuation
• Preset feature allows user to return to
previous light setting when turning lights on.
• LED light level display for presetting
illumination levels and master/accessory
units for multi-location control.
• Amber LED at bottom of LED display
indicates ON/OFF load status.
• Seven step green LED display on push pad
indicates selected light level – and reduces
brightness when OFF (night light feature).
• Pressing and holding push pad for 2 seconds
when dimmer is off brings light to full
brightness without affecting preset levels.
• Offers a 10 second delayed-off feature by
pressing and holding push pad for 2 seconds
when dimmer is on.
• Replaces a standard switch and offers
dimmer capabilities.
ASPIRE Smart Dimmers
Wallbox Lighting Controls
www.cooperwiringdevices.com
P
roject Name: Prepared By:
Project Number: Date:
C
atalog Number: Type:
ASPIRE Smart Dimmers, Wire Leads
For Lamp Type(s) Catalog No.
Rating or Fan Control Type Description Color Suffix
600W Incandescent, Halogen, Smart Master Dimmer, Single-Pole/
■■
9534___
120V/AC Magnetic Low-Voltage Multi-Location with Preset and LEDs AW, DS, SG, WS
600W Electronic Low-Voltage Smart Master Dimmer, Single-Pole/
■■
9535___
120V/AC Multi-Location with Preset and LEDs AW, DS, SG, WS
1000W Incandescent, Halogen Smart Master Dimmer, Single-Pole/
■■
9536___
120V/AC Magnetic Low-Voltage Multi-Location with Preset and LEDs AW, DS, SG, WS
1000W Electronic Low-Voltage Smart Master Dimmer, Single-Pole/
■■
9537___
120V/AC Multi-Location with Preset and LEDs AW, DS, SG, WS
1000VA Fluorescent (Mark 10
®
, Smart Master Dimmer, Single-Pole/
■■
9580___
120V/AC AmbiStar
®
& Tu-Wire
®
) Multi-Location with Preset and LEDs AW, DS, SG, WS
–– –– Accessory Dimmer, Multi-Location,
■■
9542___
120V/AC with Preset and LEDs AW, DS, SG, WS
Color Ordering Information
For ordering, include Cat. No. followed by the color code: AW (Alpine White), DS (Desert Sand), SG (Silver Granite),
WS (White Satin)
3.28"
(83.3mm)
1
.73"
(43.9mm)
2
.59"
(
65.8mm)
3.81"
(96.8mm)
1
.38"
(
35.1mm)
9534
Single-Pole & Multi-location
600W/VA, 1000W/VA
Incandescent, Halogen, Magnetic Low-Voltage,
Electronic Low-Voltage, Fluorescent
ASPIRE
™
Smart
Dimmers
3.28"
(83.3mm)
2.45"
(62.2mm)
2.59"
(65.8mm)
3.81"
(96.8mm)
1.38"
(35.1mm)
9537
Mark 10 and AmbiStar are registered trademarks of Phillips Advance.
Tu-Wire is a registered trademark of Lutron.
3.28"
(83.3mm)
1.73"
(43.9mm)
2.59"
(65.8mm)
3.81"
(96.8mm)
1.38"
(35.1mm)
9542
426