Product Data Sheet / Brochure

©2013EatonCorporation
All Rights Reserved
9PXBrochureA4revD
November2013
Eaton is a registered trademark
ofEatonCorporation.
All other trademarks are property
of their respective owners.www.eaton.eu/9PX
Due to continuing product improvement programmes, specifications are subject to change without notice.
Accessories Rack kit: 9RK, Transformer (Single Phase): TFMR11Ki, Battery Integration System: BINTSYS
Eaton 9PX UPS Technical Spec i fi ca tions
Technical Specifications 5kVA 1:1 6kVA 1:1 6kVA 3:1 8kVA 1:1 or 3:1 11kVA 1:1 or 3:1
Rating (kVA/kW) 5kVA/4.5kW 6kVA/5.4kW 6kVA/5.4kW 8kVA/7.2kW 11kVA/10kW
Electrical Characteristics
Technology On-line double conversion with Power Factor Correction (PFC) system
Input voltage 200/208/220/230/240V 1:1 200/208/220/230/240V/250V 1:1, 380/400/415 3:1
Input voltage range 176-276V without derating (up to 100-276V with derating) 1:1, 305V-480V without derating (up to 175V-480V with derating) 3:1
Output voltage/THDU 200/208/220/230/240V +/– 1%; THDU <2%
Input frequency range/THDI 40-70Hz, 50/60Hz autoselection, frequency converter as standard, THDI < 5%
Efficiency Up to 94% in Online mode, 98% in Hi-Efficiency mode Up to 95% in Online mode, 98% in Hi-Efficiency mode
Short circuit current 90A 90A 90A 120A 150A
Overload capacity 102–110% : 120s, 110–125%: 60s, 125–150%: 10s, >150%: 500ms 102–110% : 120s, 110–125%: 60s, 125–150%: 10s, >150%: 900ms
Connections
Input Terminal block (up to 10 mm
2
) Terminal block (up to 16mm
2
)
Outputs
Terminal block +
2 controlled groups of 4 IEC C13 (10A) + 2 IEC C19 (16A)
Terminal block
Outputs with HotSwap Maintenance Bypass Terminal block + 3 IEC C13 (10A) + 2 IEC C19 (16A) Terminal block + 4 IEC C19 (16A)
Batteries
Typical backup times at 50 and 70% load*
9PX 13/10 min 11/8 min 30/20min 20/15 min 13/9min
9PX + 1 EBM 60/40 min 48/34 min 70/45min 48/32 min 32/21 min
9PX + 4 EBM 220/150 min 170/120 min 210/140 min 140/100 min 100/70 min
Battery management ABM
®
and Temperature compensated charging method (user selectable), automatic battery test, deep discharge protection, automatic recognition of external battery units.
Communication
Communication ports
1 USB port, 1 RS232 serial por t (USB and RS232 por ts cannot be used simultaneously), 4 dr y contacts (DB9), 1 mini terminal block for remote On/Off and 1 for remote power Off,
1 DB15 for parallel operation.
Communication slot 1 slot for Network-MS card (included in Netpack versions), ModBus-MS or Relay-MS cards.
Operating conditions, standards and approvals
Operating temperature 0 to 40°C continuous
Noise level <45dB <45dB <48db <48db <50db
Safety IEC/EN 62040-1, UL 1778 (1:1 version)
EMC, performance IEC/EN 62040 -2, FCC Class A (1:1 version), IEC/EN 62040-3 (Performance)
Approvals CE, CB report (TUV), UL (1:1 version)
Dimensions H x W x D/Weight
UPS dimensions 440(19’’)*130(3U)*685mm 440(19’’)*130(3U)*685mm 440(19’’)*260(3U+3U)*700mm 440(19’’)*260(3U+3U)*700mm 440(19’’)*260(3U+3U)*700mm
UPS weight 48kg 48kg 88kg 84kg (1:1), 88kg (3:1) 86kg (1:1), 88kg (3:1)
EBM dimensions 440(19’’)*130(3U)*645mm 440(19’’)*130(3U)*645mm 440(19’’)*130(3U)*680mm 440(19’’)*130(3U)*680mm 440(19’’)*130(3U)*680mm
EBM weight 68kg 68kg 65kg 65kg 65kg
Power module dimensions - - 440(19’’)*130(3U)*700mm 440(19’’)*130(3U)*700mm 440(19’’)*130(3U)*700mm
Power module weight - - 23kg 19kg (1:1), 23kg (3:1) 21kg (1:1), 23kg (3:1)
Customer Service and Support
Warranty 2 years warranty
* Runtimes are shown at 0.7 power factor. Backup times are approximate and may vary with equipment, configuration, battery age, temperature, etc
1 RemoteOff/OnandRemote
Power Off connectors
2 Slot for Network-MS,
ModBus-MS or Relay-MS cards
3 Parallel operation
port(DB15)
4 External battery module
(EBM) connector with
automatic detection (RJ11)
Parts Numbers 9PX 5kVA 1:1 9PX 6kVA 1:1 9PX 8kVA 1:1 9PX 11kVA 1:1 9PX 6kVA 3:1 9PX 8kVA 3:1 9PX 11kVA 3:1
UPS with HotSwap Maintenance Bypass 9PX5KiBP 9PX6KiBP 9PX8KiBP 9PX11KiBP 9PX6KiBP31 9PX8KiBP31 9PX11KiBP31
UPS with Network Card and Rack Kit 9PX5KiRTN 9PX6KiRTN – – – – –
UPS with HotSwap MBP, Network Card
and Rack Kits
– – 9PX8KiRTNBP 9PX11KiRTNBP 9PX6KiRTNBP31 9PX8KiRTNBP31 9PX11KiRTNBP31
EBM 9PXEBM180 9PXEBM180 9PXEBM240 9PXEBM240 9PXEBM240 9PXEBM240 9PXEBM240
Power Module – – 9PX8KiPM 9PX11KiPM 9PX6KiPM31 9PX8KiPM31 9PX11KiPM31
HotSwap Maintenance Bypass MBP6Ki MBP6Ki MBP11Ki MBP11Ki MBP11Ki31 MBP11Ki31 MBP11Ki31
9PX ModularEasy (paralleling kit)
9PXMEZ6Ki 9PXMEZ6Ki 9PXMEZ11Ki 9PXMEZ11Ki – – –
Supercharger with Rack Kit – – SC240RT SC240RT SC240RT SC240RT SC240RT
1.8m Battery Connection Cable EBMCBL180 EBMCBL180 EBMCBL240 EBMCBL240 EBMCBL240 EBMCBL240 EBMCBL240
5 8IEC10Asockets(2groups
of 4 manageable sockets)
with cable retention system
6 2IEC16Asocketswithcable
retention system
7 DB9withoutputcontacts
8 USB and serial ports
9 Input/Ouputconnection
Eaton 9PX 6kVA 1:1
9PX Parallel*
9PX 10kVA 1:1
(5kVA redundant)
9PX 12kVA 1:1
(6kVA redundant)
9PX 16kVA 1:1
(8kVA redundant)
9PX 22kVA 1:1
(11kVA redundant)
9PXM10KiRTN 9PXM12KiRTN 9PXM16KiRTN 9PXM22KiRTN
*9PX Parallel system includes 2 x 9PX, ModularEasy (Parallel kit), rail kits and network cards