Installation Manual

ManualsBrandsEaton ManualsPower DistributionETN AEGIS Powerline Filte

Effective April 2014

Instruction Manual IM01005021E

Installation Instructions for Eaton’s Aegis Surge

Protective Device AGPHxxxxx and AGPVxxxxx

Contents

Description Page

Introduction ..............................2

Safety Precautions .........................2

Operation ................................2

Preparation ..............................2

Installation Procedures .....................3

Enclosure Mounting (New Applications -

Aegis PH and Aegis PV) ..................3

Enclosure Mounting (Existing Aegis HW

applications) ...........................3

Wiring Instructions Aegis PH. . . . . . . . . . . . . . . . . 3

Enclosure Mounting (Existing Aegis VL

applications) ...........................5

Wiring Instructions Aegis PV .................5

Specifications ............................7

Diagnostics ..............................7

Maintenance .............................7

Terms and Conditions ......................7

Warranty ................................8

Aegis PH

Aegis PV

Summary of content (8 pages)

PAGE 1
Instruction Manual IM01005021E Effective April 2014 Installation Instructions for Eaton’s Aegis Surge Protective Device AGPHxxxxx and AGPVxxxxx Contents Description Aegis PH Aegis PV Page Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . 2 Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Preparation . .
PAGE 2
Instruction Manual IM01005021E Effective April 2014 Installation Instructions for Eaton’s Aegis Surge Protective Device AGPHxxxxx and AGPVxxxxx Introduction Preparation Eaton’s Aegis PH and PV products are premium Surge Protective Devices (SPDs) with filtering. They are applied to protect sensitive electronic equipment (critical loads) from transients and electrical line noise. Correct installation is critical for the proper operation of the Aegis PH and PV units.
PAGE 3
Installation Instructions for Eaton’s Aegis Surge Protective Device AGPHxxxxx and AGPVxxxxx Installation  WARNING INSTALLING AN SPD THAT IS IMPROPERLY RATED FOR THE ELECTRICAL SYSTEM VOLTAGE COULD CREATE A POTENTIALLY HAZARDOUS CONDITION, RESULTING IN INJURY OR EQUIPMENT DAMAGE.  CAUTION EATON SPD PRODUCTS MUST BE INSTALLED OR REPLACED BY A QUALIFIED ELECTRICIAN TO AVOID INJURY OR EQUIPMENT DAMAGE.
PAGE 4
Instruction Manual IM01005021E Effective April 2014 Installation Instructions for Eaton’s Aegis Surge Protective Device AGPHxxxxx and AGPVxxxxx Figure 2. Aegis PH Premium Hybrid Filter Bonded System Block Diagram. Figure 3. Aegis PH Premium Hybrid Filter Unbonded System Block Diagram. 4 EATON www.eaton.
PAGE 5
Installation Instructions for Eaton’s Aegis Surge Protective Device AGPHxxxxx and AGPVxxxxx Enclosure Mounting (Existing Aegis VL applications)  CAUTION THE INPUT AND OUTPUT TERMINAL LOCATIONS ARE NOT POSITIONED ON THE SAME SIDE OF THE ENCLOSURE TOP COVER AS THE FORMER AEGIS VL MODELS. ROUTE WIRING TO ACCOMMODATE THE NEW INPUT AND OUTPUT TERMINAL LOCATIONS. Aegis VL devices mounted to a DIN Rail using the attached DIN clip.
PAGE 6
Instruction Manual IM01005021E Effective April 2014 Installation Instructions for Eaton’s Aegis Surge Protective Device AGPHxxxxx and AGPVxxxxx Figure 5. Aegis PV Premium Filter Bonded System Block Diagram. Figure 6. Aegis PV Premium Filter Unbonded System Block Diagram. 6 EATON www.eaton.
PAGE 7
Installation Instructions for Eaton’s Aegis Surge Protective Device AGPHxxxxx and AGPVxxxxx Instruction Manual IM01005021E Effective April 2014 Specifications Table 3.
PAGE 8
Instruction Manual IM01005021E Effective April 2014 Installation Instructions for Eaton’s Aegis Surge Protective Device AGPHxxxxx and AGPVxxxxx Warranty Eaton warrants these products for a period of 10 years from the date of delivery to the purchaser, 15 years if the product is properly registered with Eaton, to be free from defects in both workmanship and materials.