Product Brochure

MATERIAL CHARACTERISTICS
• Environmental: Flammability meets UL 94 requirements; V2 rated
• Temperature Rating: 0ºC to 40ºC (32°F to 104°F)
TESTING & CODE COMPLIANCE
• cULus Listed to UL1472, file no. E47967
• NOM Certified
• Neutral is not required for installation of device
(excluding Fluorescent Dimmer models).
• Incandescent and Magnetic Low-Voltage
o
ffered in single unit version.
• Installation speed enhancements include
virtually unbreakable, ultrasonically welded
top and backbody, extra-long, extra-wide
mounting straps and easy access ground
screws.
• Air-gap switch disconnects power from load,
forcing an OFF condition.
• Radio Frequency Interference (RFI) filtering for
radio, audio and video equipment.
• Power failure memory.
• Electrostatic discharge protection.
• Square Law Dimming – perceived dimming
level is proportional to the slider position.
• Color change kits are available to allow for
quick changes and less inventory.
• Tri-color packaged versions offered which
provide one unit box with three color
faceplates.
• Compatible with any decorator wallplate.
FEATURES
• Electro-mechanical push pad for ON/OFF
operation with separate DIM/BRIGHT bar.
• Push pad design provides minimal travel and
crisp actuation
• Preset feature allows user to return to
previous light setting when turning lights on.
• LED light level display for presetting
illumination levels and master/accessory
units for multi-location control.
• Amber LED at bottom of LED display
indicates ON/OFF load status.
• Seven step green LED display on push pad
indicates selected light level – and reduces
brightness when OFF (night light feature).
• Pressing and holding push pad for 2 seconds
when dimmer is off brings light to full
brightness without affecting preset levels.
• Offers a 10 second delayed-off feature by
pressing and holding push pad for 2 seconds
when dimmer is on.
• Replaces a standard switch and offers
dimmer capabilities.
• Digital circuitry provides aesthetically
pleasing soft-on/fade-off that extends lamp
life.
ACCELL Smart Dimmers
Wallbox Lighting Controls
www.cooperwiringdevices.com
P
roject Name: Prepared By:
Project Number: Date:
C
atalog Number: Type:
ACCELL Smart Dimmers, Wire Leads
426
For Lamp Type(s) Catalog No.
Rating or Fan Control Type Description Color Suffix
1000W/VA Incandescent, Halogen, Smart Master Dimmer, Single-Pole/
■■
AIM10-___
120V/AC Magnetic Low-Voltage Multi-Location with Preset and LEDs A, B, BK, C1, C2, GY, LA, V, W
1000W/VA Fluorescent (Mark 10
®
, Smart Master Dimmer, Single-Pole/
■■
AF10-___
120V/AC AmbiStar
®
& Tu-Wire
®
) Multi-Location with Preset and LEDs A, B, BK, C1, C2, GY, LA, V, W
–– –– Accessory Dimmer, Multi-Location,
■■
ARD-___
120V/AC with Preset and LEDs A, B, BK, C1, C2, GY, LA, V, W
–– –– Master Dimmer Change Kit
■■
AMC-___-BP
A, B, BK, GY, LA, V, W
–– –– Accessory Dimmer Change Kit
■■
ARC-___-BP
A, B, BK, GY, LA, V, W
Color Ordering Information
For ordering, include Cat. No. followed by the color code: A (Almond), B (Brown), BK (Black), C1 (Color Change Kit - Almond,
White, Ivory), C2 (Color Change Kit - Light Almond, White, Ivory), GY (Gray), LA (Light Almond), V (Ivory),
W (White)
3.21"
(81.5mm)
2.44"
(
62.0mm)
2.59"
(65.8mm)
3.70"
(94.0mm)
M
ounted
D
epth:
1
.25"
(
31.8mm)
AIM10
S
ingle-Pole & Multi-location
1000W/VA
Incandescent, Halogen, Magnetic Low-Voltage, Fluorescent
ACCELL Smart
Dimmers
3.21"
(81.5mm)
1
.80"
(45.7mm)
2.59"
(65.8mm)
3.70"
(94.0mm)
1.25"
(31.8mm)
ARD
Mark 10 and AmbiStar are registered trademarks of Phillips Advance.
Tu-Wire is a registered trademark of Lutron.