Technical information

104 Eaton RF-System - Help

to be created as an output at the Room Manager.

Also refer to chapter Room Manager with Safety Function – General Information

Also refer to chapter Room Manager with Safety Function – Safety Inputs

Also refer to chapter Room Manager with Safety Function – Smoke Detector

Room Manager with Safety Function – General Information:

This is what the configuration window for the Safety Function – General Information looks like:

You can do the following settings:

Field 1:

This is where the code can be defined for the customer to acknowledge an alarm. It is also

possible to either allow or not allow the customer to change the code at the Room Manager.

Field 2:

This selection window will allow you to define what to use for activating/deactivating the safety

function of the different zones (zone 1, zone 2, zone 1+2). You can either select the different inputs

at the Room Manager or the two sensor keys (left, right).

Field 3:

It is also possible to automatically activate the presence simulation after a predefined time period,

provided the safety function has been activated.