Technical information

105Eaton RF-System

Field 4:

If this option has been activated, the Room Manager will give an acoustic alarm once in a minute

in case the battery of the safety sensors is low.

Field 5:

This item allows the system to automatically carry out a determined action upon

activating/deactivating a safety function (e.g.: Switch the “Signal lamp” on upon activation, switch it

off upon deactivation).

Field 6:

This is where you can define what actions should be started in case of an alarm.

In case of an alarm it is possible to switch on 2 different outputs for an adjustable time period.

It is also possible to activate the acoustic alarm of the Room Manager for an adjustable time

period.

Also refer to chapter Room Manager with Safety Function - Overview

Room Manager with Safety Function – Safety Inputs:

This is what the configuration window for the Safety Inputs looks like:

This window is set up as follows:

Field 1: