Technical information

107Eaton RF-System

The window is set up as follows:

Field 1:

Here you can define the names of the different smoke detector inputs. There is a max. of 5 smoke

detector inputs available. In this field you can also define the texts to be displayed in the status

messages.

Field 2:

Under ”Status Alarm“ you can define in which status the alarm should be triggered.

Field 3:

Within the time period you preset here, the Room Manager expects to receive a status message

from the smoke detector input. If the Room Manager does not receive a status message within

that preset time, the alarm will be triggered.

Field 4:

Here you can display the names of the RF sensors that have been assigned.

Field 5:

If this option has been activated, the Room Manager will give an acoustic alarm once in a minute

in case the battery of the sensors is low.

Field 6:

This is where you can define what actions should be carried out in case of an alarm.

It is possible to switch on 1 output for an adjustable time period in case of an alarm.

It is also possible to activate the acoustic alarm of the Room Manager for an adjustable time

period.