Technical information

112 Eaton RF-System - Help
© 2013 Eaton Electrical Group
Show text or chart page on the Room-Manager – It is possible to display or to hide the text or the
chart page of this energy input.
Settings for costs:
Here you can do the settings for your cost calculation
Currency: Enter the currency in which you wish to have the costs displayed
Base value of costs / Month: Enter the monthly basic charge for the variable that was counted
Tariff per measuring unit: Enter the tariff per measuring unit here
CO2 per kWh: Here you can enter the CO2 factor per kWh.
Surveillance of threshold values:
Threshold value: Enter the threshold value here
kWh /: Here you can select the time period to be kept under surveillance or select the active
power directly
In case of exceeding the value: Here you can set the action to be taken in case the threshold value
is exceeded
Display alarm: If this option has been activated and if the threshold value is exceeded, a short info
page will appear at the Room Manager Display. This info page needs to be acknowledged.
Display at the Room Manager:
In 3 double-lines you can have the different consumption values displayed. The settings made
here will be visualized at the display of the Room Manager, but they can be changed at any time
again via the Settings menu in the Room Manager.
Possible settings for the display (dependend if consumer or generator is selected):
Values: Energy consumption, Energy production, Costs, Gains, CO2 cunsumption, Consumption
prognosis, Production prognosis, Cost prognosis, Gain prognosis, CO2 prognosis, Present power,
present current, present voltage
Time periods: Last hour, 24 hours, since mid-night, 7 days, since the beginning of the week, 30
days, since the beginning of the month, since the beginning of the year, total value, Alltime
Not every period of time can be selected for every value though.
Also refer to chapter General Information on the Room Manager with Energy Function
Room-Manager with Energy Function - Input MEP:
If a channel of the xC MEP device is assigned to the Room Manager with energy function, the next
free energy input will appear as an option to select. In the setting window of the Room Manager
you will now see a new tab with the number of this energy input.
Dependend on which channel of the MEP device is assigned different settings are blocked.
It is a total energy channel available for which the cost settings are blocked and 4 rate energy
channels for 4 different rates.
This is what the setting window for the energy input assigned to the total energy channel of the xC
MEP device looks like: