Technical information

122 Eaton RF-System - Help

‘Set/interrogate marker by SMS’ – If this option is activated also state of markers can be requested

and set by SMS-commands

‘Shading can be controlled by SMS’ – If this option is activated also the state of shadings can be

controlled by SMS-commands

To be able to operate inputs and outputs by SMS-commands use the check boxes on the

output-/input-configuration page.

‘Mobile phone selection’ – Manufacturer and type of the mobile phone can be selected here ,

ATTENTION: The file “handy.txt” must be located in the same directory of the MRF program to be

able to select anything here.

Syntax from User-SMS for questioning and controlling of objects:

Beginning of every SMS: ":<Password> "

afterwards: "<object name>"

following: for request "?"

for control "=<state>!"

There is the possibility to request or control more than one object with only 1 SMS.

Examples: ":1234 R1?" Requesting the state of Room 1

":1234 O2=0!" Switches output 2 to OFF

":1234 R1? O1=1! I?" Requests the state of Room 1 and every input

and switches output 1 to ON

If more than one objects is requested, every information is integrated in one answer SMS or it is

separated in more SMS if the length exceeds a maximum of 160 characters.

<Password>:

4-16 characters alpha numeric, can be set in the MRF configuration window or in the

Room-Manager, is immediately following the “:” and ends with the first blank space afterwards

<<Object name>:

The object name defines which object should be operated, you can use either the full name of the

object or a short form.