Technical information

127Eaton RF-System

Setting of Delay time for Channel A:

The Switch-Off delay time for channel A can be set to the following values:

If movement is detected the delay time begins to run and after this time the channel automatically

switches OFF. Now if new movement is detected in this time the delay time begins to run new.

So for example the light is at least ON for the defined delay time if no new movement is detected.

Setting of ambient light level:

Movement is only detected if the actual light value is within the set light level.

Setting of motion sensitivity:

The impulses specifies how often a movement has to be detected before the motion detector

reacts.