Technical information

144 Eaton RF-System - Help
© 2013 Eaton Electrical Group
Energy:
The channel for energy is always active and the transmission of values cannot be deactivated.
Active power:
The transmission of this variable to be measured can be activated/deactivated and the accuracy of
measuring can be adjusted.
Voltage:
The transmission of this variable to be measured can be activated/deactivated and the accuracy of
measuring can be adjusted.
Current:
The transmission of this variable to be measured can be activated/deactivated and the accuracy of
measuring can be adjusted.
As a general rule the cycle time for the transmission of values of all channels can be selected to be
between 10 minutes and 1 hour.
Also refer to chapter Room Manager with Energy Function – Input with Energy measuring Sensor
Heating actuator
The heating actuator is used to control of specific electrical heating panels