Technical information

145Eaton RF-System

Defined by what device is assigned to it in the MRF program it can be used in 3 different modes:

1. Operation without Room-Manager or Room controller

2. Operation with Room controller (Attention!! A special Room controller is needed!!)

3. Operation with Room-Manager

1. Operation without Room-Manager or Room controller:

In this mode the temperature measurement and set value preset is given by the radiator that is

connected to the heating actuator.

The configuration window looks like:

The setting possibility for external temperature and set value preset is deactivated in this mode.

But external sensor for operation mode switching has to be assigned. Its also possible to assign

window contacts to the heating actuator.

2. Operation with Room controller: