Technical information

148 Eaton RF-System - Help

The control of the operation mode is done by the Room-Manager (timer program or manual). It can

be defined if the actual temperature and set value preset is given b the Room-Manager or the

radiator.

In this mode window contacts must only be assigned to the room of the Room-Manager and not to

the heating actuator separately.

You can also set how the heating actuator will react after a power failure.

‘Backup mode’ – As long as no new control commands or temperature commands are received by

its assigned devices all control commands will come from the connected radiator.

‘old value’ – It does axaclty the same than before power failure until new commands and

temperature are received

BOS/COS Interface

The BOS/COS interface has the purpose to integrate occupancy sensors such as bed- or

chair-occupancy sensors in the Eaton RF System especially for the Elderly care function.

The device is mains supplied and contains of 2 RJ11 jacks to which the sensors can be