Technical information

157Eaton RF-System

a time) of the detection.

Further the time for the heating break can be defined. After this break

the thermostat will continue with the regulation based on its set- and

actual-temperature.

Set value day:

Here you can define the set value for the day or comfort temperature

Set value night:

Here you can define the set value for the night or Standby temperature

Timer programme:

In the timer programme you can define 3 different time areas for every

day. Within this time areas the thermostat will regulate to the day

temperature and outside of this time areas the thermostat will regulate

to the night temperature. Using the Copy-function you can copy the

times of a day to another.

Autonomous – manual –

Set value:

Here you can define the Set value for the manual mode (it has no

influence on the weekly program)

Automatic change of

summer-/winter-time

If this function is activated the device will automatically switch to

summer or winter time on the respective dates.

2. Operation with an intelligent device (Room-Manager, Home-Manager…)

In this mode the regulation of the radiator will be controlled by the intelligent device.

Set-temperatures and weekly programs will be defined in the intelligent device. The RF radiator

thermostat is working like an actuator that controls the radiator depending on the set- and

actual-temperature that it receives from the intelligent device.