Technical information

16 Eaton RF-System - Help

”Display reception quality of this device” -> shows the reception quality lines from this device to all

the other selected devices.

“Display reception quality for the selected group" -> shows the reception quality of all devices in the

selected group with respect to each other

“Display reception quality with respect to the group as a table” -> shows the reception quality for

this device with respect to the selected group in table form (percentage + device name).

“Recalculate reception quality with respect to the group” -> recalculates the reception quality for

this device with respect to all the selected devices.

“Recalculate reception quality within the group” -> recalculates the reception quality of all the

selected devices with respect to each other.

The functions described above mean, for example, that the reception quality of a new device to its

closest neighbours can be calculated very quickly without having to involve the entire system in

this procedure.

New for 1.55:

Configure group basic settings

Configure the group function

New with version 2.0:

"Assign topology" -> Select an area of the project topology to which you want to allocate the

selected devices

"Copy selected devices" -> Copies the selected devices to the clipboard as virtual devices

"Remove selected devices" -> Removes the selected devices from the project

"Load changes in selected devices" -> Loads configuration changes in the selected devices (if

there are changes)

"Load basic settings in selected devices" -> Loads basic settings in the selected devices (entire

configuration is deleted)

In addition, the screen position of multiple devices can also now be changed by selecting multiple

devices and using drag & drop.

Define password

You can define a password for the system under this menu item. Each device forming part of the

project, or which is to be scanned at a later date, will receive this password when loading

(password, changes or complete).

When you start a new project and click on “Scan”, this window also opens and you can define a

password even before scanning. This password cannot be loaded in the devices during scanning,

only when loading changes on completion of the scanning process.

A password is used to ensure that the system is protected from unauthorised access.

Also see Project-Settings and Project-Password