Technical information
163Eaton RF-System
© 2013 Eaton Electrical Group
IP-settings:
IPv4:
Address - IPv4 Address of the ECI in the format "x.y.y.y" (x: 1-255, y: 0-255)
Subnet mask – Subnet mask in the same format like the IP address
Gateway – Address of the Gateways or the Router
IPv6:
Address - IPv6 Address of the ECI in the Format "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx"
(x...Hexadecimal-number 0-9,A-F)
Net-Prefix-Length – Length of the Ipv6 Net prefix
Ethernet-Routing:
Allow Etherner Routing – If this option is activated the ECI can be used as Ethernet Router and will
be considered when calculating connections
Device-Information:
MAC-Address – Shows the MAC-Address of the network part of the ECI
HW-Version – Shows the Hardware version of the ECI with Variant, Version 1 and Version 2.
SW-Version DIGI – Shows the Software Version of the DIGI Part of the CI
SW-Version RF - Shows the Software Version of the RF Part of the CI