Technical information

165Eaton RF-System

In this configuration the Multi-Heating actuator works in the operation type Heating only therefor we

recommend plugging the jumpers on the Multi-Heating actuator for each channel to „Heating only“.

That will make sure that these channels will never be controlled when operation type cooling is

active.

Operation with Room-Manager:

In this case every connected channel of the Multi-Heating actuator receives Set- and actual

temperature from a Room of the Room-Manager. Each Room can be connected to multiple inputs

of the Multi-Heating actuator but each input can only have one connection.

If an input of the Multi-Heating actuator is used for „Heating only“, „Cooling only“ or „Heating and

Cooling“ can be defined when drawing the connection.

Before connecting Rooms with inputs of the Multi-Heating actuator you have to make sure that the

Room-Manager and Multi-Heating actuator always are in the same operation type. This is done by

connecting the „Operation type output“ of the Room-Manager with the „Heating/Cooling“ input of

the Multi-Heating actuator. .

The Set values and the timer programs for each room can later be configured in the

Room-Manager configuration window.