Technical information

168 Eaton RF-System - Help

Save as file:

The possibility to save the list as a file in the TXT- or the extended DPL-format. The

new DPL-format offers additional information about the Topology area of the connected devices as

well as the area names.

Download by RF:

The list will be downloaded in the extended format to the external memory of

the USB-RF-Communication Stick for later use.

Details about the extended DPL-format can be found in the 3rd-party-documentaion.

Function of LEDs and Pushbutton:

The USB-RF-Communication Stick has 3 LED to indicate different states and one pushbutton..

Green LED: Active if the device is supplied. If a USB-Command is sent the LED will switch OFF

briefly.

Red LED: Is normally inactive. When making connections in the basic mode the LED has the

same functionality as a LED of an actuator. When the device is resetted using the pushbutton it will

blink as described in the mounting instruction of the device.

Orange LED: Briefly active when a RF-command is sent or received

Pushbutton: With the pushbutton you can completely reset the device. The sequence is identical

like deleting an actuator in basic mode.

Also see Software Update of USB-RF-Sticks

Smart Home Controller

The Smart Home Controller serves as a central control & communication unit. It can send

commands to all actuators and receive commands from all sensors, which it then processes

internally. It does not have an own display, therefore it needs for operation and visualization one of

the following devices:

For configuration purpose:

Laptop, PC or Tablet PC with browser (Microsoft Internet Explorer, Mozilla Firefox, Google

Chrome, Opera, etc)

For Visualization & Operation purpose: