Technical information

176 Eaton RF-System - Help
© 2013 Eaton Electrical Group
Off with Advance Warning
free selectable for and
Push-button/Key Mode
free selectable for and
Surge
free selectable for and
Blinking
free selectable for and
Activate Lock
free selectable for and
Release Lock
free selectable for and
Functions for Room controller, temperature input and analog input:
On / Off (Standard)
ON / OFF, only for selectable
On / Switch-on Delay
free selectable for and
Off / On with Switch-Off delay
free selectable for and
Off / Switch.off Delay
free selectable for and
Off with Advance Warning
free selectable for and
Push-button/Key Mode
free selectable for and
Surge
free selectable for and
Blinking
free selectable for and
Activate Lock
free selectable for and
Release Lock
free selectable for and
See also:
Switching actuator 10A/16A - General
Switching actuator 10A/16A – Binary input
Switching actuator 10A/16A – Energy measurement
Switching actuator 10A/16A – Extended Status message
Binary input – function:
In the tab ‚Binary input‘ you see all configuration possibilities for the binary input function.
The setting of the detection mode similar to the normal binary input is: Mode 1 – Pushbutton, Mode
2 – Switch;
The mode cannot be changed if a switch function is already configured for the binary input in the
internal actuator function or the binary output channel is connected to any other device.
For the binary output channel the option for cyclic sending can be configured (only Mode 2) with a
time between 10 minutes and 18 hours. The output channel will only be sent if there is a
connection to another device.