Technical information

177Eaton RF-System
© 2013 Eaton Electrical Group
also see:
Switching actuator 10A/16A - General
Switching actuator 10A/16A – Actuator function
Switching actuator 10A/16A – Energy measurement
Switching actuator 10A/16A – Extended Status message
Energy measurement - function:
In the tab ‚Energy measurement‘ you can see all configuration possibilities for the Energy
measurement function.
Energy:
For the output channel of the energy the cyclic time can be set between 10 minutes and 1 hour.
Power:
The sending frequency for a power change can be set. It depends on the nominal power change
over a certain time.
Additionally the Power channel will be sent at least every 50 minutes cyclically even when there is
no change in the power value.
With the option ‘Send the status message also if the power value changes’ the new extended