Technical information

19Eaton RF-System
© 2013 Eaton Electrical Group
-> edit -> Calculate all connections new
New: Scan also reception quality with normal data.
When deactivated no reception quality is scanned. You can only scan it separately by a new menu
item.
New for 1.53:
Behavior when saving the file: Create a backup copy with date- and time information
If this option is activated everytime you use the command ‘save’ an additional copy of your project
including the time stamp in the file name is generated in the same folder.
New with 2.0:
The functions of the professional version can now be activated by selecting the option "Enable all
functions of the professional version".
Ethernet routing:
In the event that Ethernet communication interfaces are present in the project, you can define here
whether the Ethernet routing should be conducted over IPv4 or IPv6 addresses.
New for 2.15 (only if working with USB-RF-Configuration Stick):
If you are using the new USB-RF-Configuration Stick you can set the Transmit- and
Receive-power of the Gateway (Default 90%).
In some situations it may be of advantage to work with a reduced range (in special when you want
to scan only small areas).
After every MRF restart this is always set to 90% to prevent unintentional settings.
Commands of the Insert menu
The
Insert
menu contains the following commands.
Background grafic...
Adds a background graphic to the
workspace.
Project-Note
Adds a note to the workspace.
Group frames
Activates/deactivates the mode for drawing
group frames
MRF Project...
Option to import devices in an existing MRF
project or as a configuration template
Virtual devices...
Option to insert desired virtual devices from a
device database
Devices by Barcode
Inserts devices by scanning a Barcode
Insert background grafic
This function offers the possibility of inserting a desired graphic (BMP, JPG, JPEG or GIF format)
in the project as a background grafic. Whether this graphic depicts a building plan or the installer's
company logo, is left to the user's discretion.
The function
Insert background grafic
can be executed in several ways:
1. Menu
Insert
->
Background grafic...
2. Right-click on blank MRF workspace ->
Insert background grafic...
3. Tool bar ->