Technical information

194 Eaton RF-System - Help

After a command, the actuator will now dim to the value of 80%.

Configuration Example of the Shutter Actuator

For basic configuration, e.g. selecting the functions, please refer to

Configuration Example of the Switching Actuator

A shutter actuator has no selection options for operating status after power recovery nor for

Blinking in case of a low sensor battery. The only time-related settings that can be carried out are

for the control time (with a long push at the key or push-button) and the runtime (for functions such

as open, close, etc.)

1. The runtime can be changed by moving the slider control to 10 seconds (min. 1 second to max.

1h, standard 1 minute).