Technical information

202 Eaton RF-System - Help

The blue line goes from the sensor to the group master (Switching actuator 7). That actuator

acknowledges, every other actuators are just members of the group.

Configure the group function

The function is used to configure a common group function from one sensor to many actuators in

one single step. The bigger the group is the more time I can save by using this function.

To be able to use this function one sensor and at least one actuator that has a connection to that

sensor has to be selected. For executing this function you have to right click the sensor and

choose the option ‘Configure the group function’ in the popup menu. If you selected a sensor with

more than one sensor channel you will be asked to choose the desired channel. After that the

configuration windows of the selected actuator types will pop up one after another so you can

configure the function for each actuator type individually.

Example:

Group function of several actuators of different type for RC-2-fold (left rocker) – OFF function: