Technical information

208 Eaton RF-System - Help

connection to another device for example) it will also be locked for the whole group.

For a group of actuators you can only configure the basic settings with this function and for

sensors basically every parameter can be configured.

Process:

If you select more than one device with the selection mode there will be the option ‘configure group

basic settings’. The function will only work if the selected devices are of the same type.

Depending on the device type the configuration window of the group will popup after executing the

function and you can do the common settings for the selected devices.

Group settings switching actuator:

Group settings dimming actuator: