Technical information

22 Eaton RF-System - Help

Insert group frames

This function offers the option of drawing frames with titles (max. 21 characters) in the workspace.

These can be used for optical grouping of the device groups when the Project Topology function is

not used.

The function

Insert group frames

can be executed in several ways:

1. Menu

Insert

Group frames

Right-click on blank MRF workspace

Create group frames

Tool bar

As with the selection mode, the function remains active until it is deactivated (menu re-selection of

Insert

Group frames

or using the tool bar ->

)

After the frame has been moved (left-click and hold, then release in desired end position) the MRF

will request the input of a frame title. A maximum of 21 characters are possible and at least one

symbol must be used. Once you have confirmed with OK, the frame will be displayed.

By right-clicking in the workspace where one or more group frames are present, a pop-up menu

will appear in which a frame and its title can be further edited using an expanded menu.

The following options are available:

Delete group frames

: Removes the selected frames from the project

Change size and position

: Unlocks the frame so that the size and position can be changed

with the mouse; the frame is relocked by selecting this option again

Rename group frame...

: The title of the group frame can be edited

All group frames in the project can be shown or hidden by going to menu options

View

Group

frames

or by

Right-clicking in the workspace

Display group frames