Technical information

226 Eaton RF-System - Help

When you start a new project and click on “Scan”, this window also opens and you can define a

password even before scanning. This password cannot be loaded in the devices during scanning,

only when loading changes on completion of the scanning process.

Load password:

All devices forming part of the project which do not yet have the current password are loaded with

the defined password.

This command exists both for an individual device (via the device drop-drown menu) or for the

system as a whole via “Edit -> Load password”.

Delete password

The password for all devices within the project which have a password is now deleted.

Individual devices in which the password has already been deleted previously or which have not

yet been assigned a password will not be included. The password for the project will also be reset

to "No password".

The password can also be deleted individually from one device via “Device drop-down menu ->

delete password".

However, parameterization and assignments to other xComfort devices will not be deleted.

The current system password is always shown in the bottom right area of the status bar.

Software Update of USB-RF-Sticks

With this function you can load a new software to the USB-RF-Sticks (CKOZ-00/14 and

CKOZ-00/13).

For the USB-RF-Configuration Stick you can execute this function by „Menu Gateway -> Software

Update and for the USB-RF-Communication Stick by Right click on the device symbol and

selecting „Load new software...“.

Update procedure:

If the software update window shows the message „Boot loader OK“ no error occurred and the

software update can be executed.

Select the new software by clicking the button „Select software“.

If a valid software for the device has been selected the message „RFP-file OK“ will be displayed in

the update window otherwise a specific error message will be displayed and the „Load software“