Technical information

23Eaton RF-System

Insert MRF project

This function offers the option of inserting devices (incl. all settings) from an already-existing MRF

project into your current project.

When doing this, the user can choose whether the devices are to be inserted as real devices or as

virtual devices.

The following conditions must be present:

-) all devices in the project to be imported must be known and fully scanned (no question marks)

-) the project to be imported may not include any devices with the same serial number as devices

in the current project (not with virtual devices)

-) the project to be imported must have been created with the same or an older MRF version than

used in the current project

What is imported:

-) devices, their names and complete device configuration

-) all device connections to one another

-) all device reception qualities among each another

-) the position of the device in the workspace (when importing, however, one insertion point to

which the device positions are to orient will be defined)

The project password will not be imported. All imported devices will take on the password

for the current project!

The function

Insert MRF project

can be executed in several ways:

1. Menu

Insert

MRF project

Tool bar

After the function has been executed, the insertion options will be displayed.

Here you can select whether the original project or a configuration template for the selected project

is to be inserted, and whether group frames and project notes are also to be included.

After confirming with OK and selecting the desired project, the MRF will ask for the screen

positions into which the devices are to be inserted.

By left-clicking on the desired position in the workspace, the devices are inserted and the function

is then concluded. The current project password will be adopted for all imported devices.

Insert original project

: All devices in the selected project will be inserted very normally as real

devices.