Technical information

27Eaton RF-System

You have the possibility to scan the Barcode by a normal USB-Barcode-Scanner or to enter the

Code-numbers manually to the entry field.

USB-Barcode Scanner:

Scan the Barcode of the desired device -> The Code will be checked after clicking on the ‘Verify’

button and if valid a new window with the device details will pop up.

Depending on the type of the used Barcode-Scanner the optimum reading distance between

scanner and Barcode can vary slightly. It is recommended to read the operation manual of the

Barcode-Scanner before use. It is also helpful to configure the Barcode-Scanner in a way that it

will add a Tabulator sign after a data scan. In that case pressing the ‘Verify’ button would no longer

be necessary and the Barcode would be checked automatically and the window of the device

details will pop up.

Manual entry:

Enter the numbers (before the -) on the Barcode-Sticker without any spaces in the Barcode filed

and press the ‘Verify’ button when you are finished -> If the Code is valid a new window with the

device details will pop up

By pressing the ‘Quit’ button the Barcode-Scan function will be exited

By pressing ‘Info’ or hitting F1 this help window will be displayed

In the area ‘Devices already in the project’ you can see an overview of already scanned devices

(by Barcode or normal scan)

Barcode-Scan Device details: